IS 1012 : 2002 Turbine Lubricating Oils -- Specification

1 Scope

This standard prescribes the requirements and methods of sampling and testing for lubricating oils intended for use as lubricants and control fluids in steam, gas and hydro turbinesystems at ambient temperatures of 0°C and above.

2 References

IS 1447 : Part 1 : 2000 Petroleum and itsproducts - Methods of sampling: Part 1 Manual sampling

IS 1448 Methods of test for petroleum and its products:

Part 1 : 1971 Neutralization number of potentiometrictitration

Part 2 : 1967 Acidity

Part 10 : 1970 Cloud point and pour point

Part 15 : 1976 Detection of copper corrosion from petroleum products by the copper strip tarnish test

Part 16 : 1990 Density of crude petroleum and liquid petroleum products by hydrometer method

Part 25 : 1976 Determination of kinematic and dynamic viscosity

Part 56 : 1980 Viscosity index by calculation

Part 69 : 1969 Flash and fire point by cleveland (open) cup

Part 91 : 1979 Emulsion characteristics of petroleum oil and synthetic fluids

Part 96 : 1980 Rust preventing characteristics of steamturbine oil in the presence of water

Part 102 : 1981 Determination of air release value

Part 106 : 1981 Determination of oxidation characteristics of inhibited steamturbine oils

IS 9466 : 1980 Viscosity classification for industrial liquid lubricants