IS 10496 : 2024 Feed Water, Boiler Water and Condensate Water for High Pressure Boilers - Specification
ICS 13.060.50, 27.060.30 | CHD 13 |
1 SCOPE
1.1 This standard prescribes requirements for feed water, boiler water, steam and condensate for watertube boilers.
1.2 The requirements prescribed are for boilers operating at pressures above 5.9 MN/m2 (5.9 × 106 Pa) during normal operation of the unit with normal water level in boiler and with nominal output at nominal pressure. Any serious deviation from the above shall be discussed in advance with the boiler manufacturer.
2 REFERENCES
The standards listed in Annex A contain provisions, which through reference in this text, constitute provisions of this standard. At the time of publication, the editions indicated were valid. All standards are subject to revision and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent edition of these standards.
IS No. | Title |
IS 3025 | Methods of sampling and test (physical and chemical) for water and wastewater |
(Part 11) : 2022/ISO 10523 : 2008 | pH value (second revision) |
(Part 14) : 2013/ISO 7888 : 1985 | Specific conductance (wheatstone bridge, conductance cell) (second revision) |
(Part 21) : 2009 | Hardness (second revision) |
(Part 31/Sec 1) : 2022 | Phosphorus, Section 1 Determination by vanadomolybdophosphoric acid, stannous chloride, ascorbic acid and persulphate method (second revision) |
(Part 35) : 2024 | Silica (second revision) |
(Part 38) : 1989 | Dissolved oxygen (first revision) |
(Part 42) : 2024 | Copper (second revision) |
(Part 45) : 1993 | Sodium and potassium (first revision) |
(Part 53) : 2024 | Iron (second revision) |
(Part 73) : 2021/ISO 20236 : 2018 | Instrument based method for determination of total organic carbon (TOC), dissolved organic carbon (DOC), total bound nitrogen (TNb), and dissolved bound nitrogen (DNb) |
IS 17614 | Water quality - Sampling |
(Part 1) : 2021/ISO 5667-1 : 2020 | Guidance on the design of sampling programmes and sampling techniques |
(Part 3) : 2021/ISO 5667-3 : 2018 | Preservation and handling of water samples |