Revised Standard from Last Update.

1. Scope

This standard covers the requirements of pedal assembly suitable for mopeds.

2. References

The following standards contain provisions which, through reference in this text, constitute provision of this standard. At the time of publication, the editions indicated were valid. All standards are subject torevision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standard indicated below:

507 : 1993 General purpose grease (third revision)

513 (Part 1): 2016 Cold reduced carbon steel sheet and strip: Part 1 Cold forming and drawing purposes ( sixth revision)

513 (Part 2): 2016 Cold reduced carbon steel sheet and strip: Part 2 High tensile and multi-phase steel (sixth revision)

1068 : 1993 Electroplated coatings of nickel plus chromium and copper plus nickel plus chromium ( third revision)

1501 (Part 1): 2013/ISO 6507-1 : 2005 Metallic materials — Vickers hardness test: Part 1 Test method ( fourth revision)

1573 : 1986 Electroplated coatings of zinc on iron and steel (second revision)

2062 : 2011 Hot rolled medium and high tensile structural steel (seventh revision)

2500 (Part 1) : 2000/ISO 2859-1 : 1999 Sampling inspection procedures: Part 1 Attribute sampling plans indexed by acceptable quality limit (AQL) for lot-by-lot inspection (third revision)

2898 : 1976 Specification for steel balls for rolling bearings ( first revision)

3074 : 2013 Steel tubes for automotive purposes (third revision)

5517 : 1993 Steels for hardening and tempering (second revision)

9766 : 1992 Flexible PVC compounds ( first revision)