IS 10842 : 1984 Evaluation Procedure for Y-groove Weld Crackability Test in Structural Steel

1 Scope

1.1 This standard specifies the evaluation procedure forY-groove weld crackability test for carbon and low alloy structuralsteels and is applicable for This products:

a) Plates of thickness over 12 mm;

b) Flats of over 12 mm thickness and 80 mm width;

c) Beams having a minimum thickness of flange as 12.5 mm andminimum width of flange as 165 mm;

d) Channels having a minimum thickness of leg of 12.5 mm and aminimum width of flange as 165 mm;

e) Angles having a minimum thickness of leg of 12.5 mm and aminimum width of 80 mm of at least one of the legs; and

f) Tee-bars having a minimum thickness of flange of 12.5 mm andminimum width of flange of 165 mm.

2 References

IS 2 :1960Rules for rounding off numerical values

IS 814 : Part 1 : 1974 Specification for coveredelectrodes for metalarc welding of structural steel:Part 1 For welding products other than sheets

IS 2062 :1984Specification for weldable structural steel

IS 3073 :1967Assessment of surface roughness