IS 10951 : 2020 Specification for Polypropylene ( PP ) Materials for Moulding and Extrusion
Revised Standard from Last Update.
1 SCOPE
1.1 This standard prescribes the designation system, requirements, methods of sampling and tests for polypropylene (PP) thermoplastics material. It applies to the material ready for normal use in the form of powder, granules or pellets and to materials unmodified or modified by additives, fillers, etc.
1.2 This standard is applicable to all propylene homopolymers and to copolymers of propylene as prescribed in 3.3 and 3.4 (b) IS 16738.
1.3 It is not intended to imply that materials having the same designation give necessarily the same performance. This standard does not provide engineering data, performance data or data on processing conditions which may be required to specify a material for a particular application and/or method of processing.
If such additional properties are required, they shall be determined in accordance with the test methods specified in 6.3.2 if suitable.
1.4 This standard does not cover master batches.
2 REFERENCES
The Indian standards listed in Annex A contain provisions which, through reference in this text, constitute provisions of the standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards listed in Annex A.