ICS 87.040                           CHD 20

Reaffirmed 2022

1. Scope

This standard prescribes the requirements, methods of sampling and test for ready mixed paint, brushing, grey filler, for enamels, for use over primers. The material is used as a filler over the primer in the painting system normally followed by enamels.

2. Referenced

The standards listed in Annex A contain provisions which through reference in this text, constitute provisions of this standard. At the time of publication, the editions indicated were valid. All standards are subject to revision and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated in Annex A.

5 : 2007 Colours for ready mixed paints and enamels (fourth revision)

101 Methods of sampling and test for paints, varnish and related products: Part l Test on liquid paints (general and physical),

Sec 1 : 1986 Sampling (third revision)

Sec 2 : 1987 Preliminary examination and preparation of samples for testing (third revision)

Sec 3 : 1986 Preparation of panels (third revision)

Sec 5 : 1989 Consistency (third revision)

Sec 6 : 1987 Flash point (third revision)

Sec 7 : 1987 Mass per 10 litres (third revision)

Part 2 Test on liquid paints (chemical examination),

Sec 1 : 1988 Water content (third revision)

Part 3 Tests on paint film formation

Sec 1 : 1986 Drying time (third revision)

Sec 2 : 1989 Film thickness

Sec 4 : 1987 Finish (third revision)

Part 4 Optical tests on paint films

Sec 1 : 1988 Opacity (third revision)

Sec 2 : 1989 Colour (third revision)

Part 5 Mechanical tests on paint films

Sec 2 : 1988 Flexibility and adhesion (third revision)

Part 6 Durability tests on paint films

Sec 2 : 1989 Keeping properties (third revision)

Part 8 Tests for pigments and other solids

Sec 1 : 1993 Residue on sieve (third revision)

Sec 5 : 1993 Lead Restriction test(third revision)

1070 : 1992 Reagent grade water (third revision)

1303 : 1983 Glossary of terms relating to paints (second revision)

1407 : 1980 Round paint tins (second revision)

1745 : 1978 Petroleum hydrocarbon solvents (second revision)

2552 : 1989 Steel drums (galvanized and ungalvanized) (third revision)

2074 (Part 1) : 2015 Ready Mixed Paint, Air Drying, Red Oxide - Zinc Chrome, Priming - Specification: Part 1 For Domestic and Decorative Applications (third revision)

2932 (Part 1) : 2013 Enamel, Synthetic, Exterior: (a) Undercoating (b) Finishing - Specification: Part 1 For Domestic and Decorative Applications

5661 : 1970 Code of practice for packing and markng of packages of paints, enamels, varnishes and allied products