IS 11169 : Part 2 : 2023 Steels for Cold Heading/Cold Extrusion Applications - Part 2 Stainless Steels - Specification
New Standard from Last Update.
1 SCOPE
1.1 This standard (Part 2) covers the requirements for stainless steels intended for cold heading or cold extrusion and are delivered as wires, wire rods or bars with nominal sizes of 0.8 mm up to 50 mm for austenitic steels, up to 25 mm for ferritic steels and up to 100 mm for martensitic steels.
1.2 This standard is not applicable to the properties of cold headed/cold extruded parts.
2 REFERENCES
The standards given below contain provisions which through reference in this text, constitute provision of this standard. At the time of publication, the editions indicated were valid. All standards are subject to revision and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent edition of these standards:
IS No. Title
IS 228 (all parts) Methods of chemical analysis of steels
IS 919 (Part 2) : 2014/ISO 286-2 : 2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes: Part 2 Tables of standard tolerance classes and limit deviation for holes and shafts (second revision)
IS 1608 (Part 1) : 2022/ISO 6892-1 : 2019 Metallic materials - Tensile testing: Part 1 Method of test at room temperature (fifth revision)
IS 1762 (Part 1) : 1974 Code for designation of steels: Part 1 Based on letter symbols (first revision)
IS 3711 : 2020/ISO 377 : 2017 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (third revision)
IS 8910 : 2022/ISO 404 : 2013 Steel and steel products - General technical delivery requirements (second revision)
IS 11371 : 2022 Method for macroetch testing inspection and rating of wrought steel products (first revision)
IS/ISO 14284 : 1996 Steel and iron - Sampling and preparation of samples for the determination of chemical composition