IS 11298 : Part 2 : 2024/IEC 60674-2 : 2016 Plastic Films for Electrical Purposes - Specification - Part 2 Methods of Test

ICS 17.220.99; 29.035.20

ETD 02

NATIONAL FOREWORD

This Indian Standard (Part 2) (Second Revision) which is identical to IEC 60674-2 : Specification '2016 for plastic films for electrical purposes - Part 2: Methods of test' issued by the International Electrotechnical Commission (IEC) was adopted by the Bureau of Indian Standards on the recommendation of the Solid Electrical Insulating Materials and Insulation Systems Sectional Committee and approval of the Electrotechnical Division Council.

This revision has been undertaken to align this standard with the latest International Standard of IEC 60674-2 : 2016.

This standard (Part 2) is one of the series of Indian Standards which deals with plastic films for electrical purposes. The series consists of following parts:

Part 1 Definitions and general requirements

Part 2 Methods of test

Part 3 Specifications for individual materials

This standard (Part 2) contains the test methods to be used in testing plastic films for electrical purposes to meet the requirements prescribed in the various sections of Part 3.

The text of the IEC standard has been approved as suitable for publication as an Indian Standard without deviations. Certain conventions are, however, not identical to those used in Indian Standards.

Attention is particularly drawn to the following:

a) Wherever the words 'International Standard' appears referring to this standard, they should be read as 'Indian Standard'; and

b) Comma (,) has been used as a decimal marker, while in Indian Standards the current practice is to use a point (.) as the decimal marker.