IS 11309 : 2023 Method for Conducting Pull-Out Test on Anchor Bars and Rock Bolts
1 SCOPE
This standard lays down the method for conducting anchor pull-out test in rock and the evaluation of bond strength between anchor and grout or grout and rock.
NOTES
1 This method assumes that diameter of the bore in rock throughout the length of anchor is uniform and cement mortar density around the anchor and throughout the length of anchor is also uniform.
2 Grouting is either done by cement mortar or with resin. It assumes that grouting is uniform throughout its length.
3 The number of test conducted is as per the agreement. In absence of that minimum 10 percent of the sample should be tested for design and minimum 2 percent sample should be tested for proof check, or as per the agreement.
2 REFERENCES
The following standard contains provisions, which through reference in this text, constitutes provisions of this standard. At the time of publication, the edition indicated was valid. All standards are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent edition of the standard listed below:
| IS No. | Title |
| IS 6066 : 1994 | Pressure grouting of rock foundations in river valley projects - Recommendations (second revision) |