Revised Standard from Last Update.

1. SCOPE

This standard prescribes the requirements and methods of sampling and tests for temporary corrosion preventive fluid, soft film, solvent deposited, water displacing suitable for the protection of metal surfaces mainly consisting of iron and steel during transport and storage.

2. REFERENCES

The following Indian Standards contain provisions, which through reference in this text constitute the provisions of the standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below:

170 : 2020 Acetone - Specification (fifth revision)

296 : 1986 Specification for sodium carbonate anhydrous (third revision)

410 : 1977 Specification for cold rolled brass sheet, strip and foil (third revision)

513 (Part 1) : 2016 Cold reduced carbon steel sheet and strip: Part 1 Cold forming and drawing purpose (sixth revision)

517 : 2020 Specification for methanol (methyl alcohol) (third revision)

537 : 2011 Toluene - Specification (second revision)

713 : 1981 Specification for zinc base alloy ingots for die casting (second revision)

737 : 2008 Wrought aluminum and alloy sheet and strip for general engineering purposes (fourth revision)

1070 : 1992 Reagent grade water - Specification (third revision)

1447 (Part 1) : 2021 Methods of sampling of petroleum and its products: Part 1 Manual sampling (second revision)

1448 Methods of tests for petroleum and its products

(Part 15) : 2004/ISO 2160 : 1998 Petroleum products - Corrosiveness of copper - Copper strip test (third revision)

(Part 20) : 2019 Determination of flash point - Abel closed cup method (third revision)

(Part 21) : 2019/ISO 2719 : 2016 Determination of flash point - Pensky Martens closed cup method (fourth revision)

(Part 25/Sec 1) : 2018/ISO 3104 : 1994 Determination of kinematic and calculation dynamic viscosity (second revision)

(Part 157) : 2018 Rust protections by metal preservatives in the humidity cabinet

4408 : 1979 Specification for sodium chloride, analytical reagent (first revision)