IS 1258 : 2005 Bayonet Lampholders
Reaffirmed 2020
1 Scope
1.1 This standard applies to bayonet lampholders B15d and B22d for connection of lamps and semi-luminaires to a supply voltage not exceeding 250 V. As far as it reasonably applies, the standard also covers lampholders, which are wholly or partly integral with a luminaire or intended to be built into appliances.
Independent lampholders, for example, backplate lampholders, not specifically intended for building-in, are submitted to the additional requirements detailed in 4.
Note - Where lampholders are used in luminaires, their maximum operating temperatures are specified in relevant parts of IS 10322.
B15 denotes the cap/holder fit as given in Data Sheets 7004-11 and 7005-16 with the corresponding gauges.
B22 denotes the cap/holder fit as given in Data Sheets 7004-10 and 7005-10 with the corresponding gauges.
2 References
IS 418 : 2004 Tungsten filament lamps for domestic and similar general lighting purposes
IS 694 : 1990 PVC insulated cables for working voltages up to and including 1 100 V
IS 2824 : 1975 Method for determining the comparative tracking index of solid insulating materials under moist conditions
IS 9000 : Part 7 : Sec 1 to 5 : 1979 Basic environmental testing procedures for electronic and electrical items: Part 7 Impact test (Sec 1 to 5 in one volume)
IS 9968 : Part 1 : 1988 Elastomer insulated cables: Part 1 For working voltages up to and including 1 100 V
IS 10322 Luminaries:
IS Part 1 : 1982 General requirements
IS Part 2 : 1982 Constructional requirements
IS Part 3 : 1984 Screw and screwless terminations
IS Part 4 : 1984 Methods of tests
11000 Part 2 : Sec 1 : 1984 Fire hazard testing: Part 2 Test methods, Section 1 Glow-wire test and guidance
11000 Part 2 : Sec 2 : 1984 Fire hazard testing: Part 2 Test methods, Section 2 Needle flame test
12063 : 1987 Classification of degree of protection provided by enclosures of electrical equipment
15518 Safety requirements for
IS Part 1 : 2004 incandescent lamps: Part 1 Tungsten filament lamps for domestic and similar general lighting purposes
This Standard has Two Amendments.
Amendment 1 and 2 is Added.