IS 1259 : 2022 Specification for Vinyl Coated Fabrics
Revised Standard from Last Update.
1 SCOPE
1.1 This standard prescribes requirements, methods of sampling and test for vinyl coated fabrics whether plain, embossed, printed or otherwise treated, on woven or knitted fabrics, obtained by applying on one side of base fabric, a substantially continuous coating of a suitably plasticized polymer of vinyl chloride, or a copolymer, the major constituent of which is vinyl chloride.
1.2 This specification covers fabrics coated with solid PVC.
1.3 This standard does not cover requirements for the following types of coated fabrics:
a) Based on non-woven materials,
b) On which all or part of the coating is foamed, and
c) That are permeable to air.
2 REFERENCES
The following standards contain provisions which, through reference in this text, constitute provisions of this standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreement based on standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below:
IS/ISO 105-B01 : 2014 Textiles — Tests for colour fastness: Part B01 Colour fastness to light : Daylight
IS/ISO 105-B02 : 2014 Textiles — Tests for colour fastness: Part B02 Colour fastness to artificial light : Xenon arc fading lamp test
177 : 1989 Cotton drills — Specification (fourth revision)
285 : 2021 Laundry soaps — Specification (fourth revision)
296 : 1986 Specification for sodium carbonate, anhydrous (third revision)
2244 : 1972 Glossary of terms relating to treated fabrics (first revision)
4905 : 2015 Random sampling and randomization procedure (first revision)
7016 (Part 1/Sec 1) : 2016/ISO 2286-1 : 1998 Methods of test for coated and treated fabrics: Part 1 Determination of roll characteristics, Section 1 Methods for determination of length, width and net mass (second revision)
7016 (Part 1/Sec 2) : 2019/ISO 2286-2 : 2016 Methods of test for coated and treated fabrics: Part 1 Determination of roll characteristics, Section 2 Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (second revision)
7016 (Part 2) : 2015/ ISO 1421 : 1998 Methods of test for coated and treated fabrics: Part 2 Determination of tensile strength and elongation at break (second revision)
7016 (Part 3/Sec 1) : 2017 /ISO 4674-1 : 2003 Methods of test for coated and treated fabrics: Part 3 Determination of tear resistance, Section 1 Constant rate of tear method (second revision)
7016 (Part 4) : 2003/ ISO 7854 : 1995 Methods of test for coated and treated fabrics: Part 4 Rubber-or plastics-coated fabrics — Determination of resistance to damage by flexing (second revision)
7016 (Part 5) : 2019/ ISO 2411 : 2017 Methods of test for coated and treated fabrics: Part 5 Rubber-or plastics-coated fabrics — Determination of coating adhesion strength (second revision)
7016 (Part 9) : 2003/ISO 5978 : 1990 Methods of test for coated and treated fabrics: Part 9 Rubber-or plastics-coated fabrics — Determination of blocking resistance (second revision)
15061 : 2002 Automotive vehicles — Flammability requirements