[ Superseding 1) IS 12970 (Part 5/Sec 1) : 1991; 2) IS 12970 (Part 5/Sec 2) : 1992; 3) IS 12970 (Part 5/Sec 3) : 1992; 4) IS 12970 (Part 5/Sec 4) : 1992; 5) IS 12970 (Part 5/Sec 5) : 1993; 6) IS 12970 (Part 5/Sec 6) : 1992; 7) IS 12970 (Part 6/Sec 1) : 1992; 8) IS 12970 (Part 6/Sec 2) : 1992; 9) IS 12970 (Part 6/Sec 3) :1992 and 10) IS 12970 (Part 6/Sec 4) : 1992 ]

New Standard from Last Update.

NATIONAL FOREWORD

This Indian Standard (Part 2) which is identical with with IEC 60748-3 : 1986 ‘Semiconductor devices - Integrated circuits Part 3 Analogue integrated circuits’ (Upto Amendment No.2) issued by the International Electrotechnical Commission (IEC) was adopted by the Bureau of Indian Standards on the recommendations of the Semiconductor Devices Components and Electronic Assembly Technology Sectional Committee and approval of the Electronics and Information Technology Division Council.

IS 12970 (Part 5/Sec 1 to 6) and IS 12970 (Part 6/Sec 1 to 4) [total 10 standards) were first published in 1992-1993. All ten standards were based on IEC Pub 748-3. This revision is being published combine all ten standards to align it with the latest version of IEC 60748-3: 1994 On publication of this standard, 1) IS 12970 (Part 5/Sec 1) : 1991; 2) IS 12970 (Part 5/Sec 2) : 1992; 3) IS 12970 (Part 5/Sec 3) : 1992; 4) IS 12970 (Part 5/Sec 4) : 1992; 5) IS 12970 (Part 5/Sec 5) : 1993; 6) IS 12970 (Part 5/Sec 6) : 1992; 7) IS 12970 (Part 6/Sec 1) : 1992; 8) IS 12970 (Part 6/Sec 2) : 1992; 9) IS 12970 (Part 6/Sec 3) : 1992 and 10) IS 12970 (Part 6/Sec 4) : 1992 stands withdrawn.

The text of IEC Standard has been approved as suitable for publication as an Indian Standard without deviations. Certain terminologies and conventions are, however, not identical to those used in Indian Standards. Attention is particularly drawn to the following:

a) Wherever the words ‘International Standard’ appear referring to this standard, they should be read as ‘Indian Standard’.

b) Comma (,) has been used as a decimal marker, while in Indian Standards, the current practice is to use a point (.) as the decimal marker.