IS 13071 : 2024 Wire Reinforced Rubber Hose for Sand and Gravel Suction and Discharge Services - Specification

ICS 83.140.40

PCD 13

1 SCOPE

This standard prescribes the requirements and the methods of sampling and tests for sand and gravel suction and discharge hose, suitable for a maximum working pressure of 0.7 MPa and 1.0 MPa and vacuum of 83 kPa (500 mm of mercury), having smooth and abrasion resistant inner and outer cover.

2 REFERENCES

The standards listed in Annex A contain provisions which, through reference in this text, constitute provisions of this standard. At the time of publication, the editions indicated were valid. All standards are subject to revision and parties to agreement based on standard are encouraged to investigate the possibility of applying the most recent edition of these standards.

IS No. Title
IS 280 : 2006 Mild steel wire for general engineering purposes (fourth revision)
IS 397 (Part 1) : 2003 Methods for statistical quality control during production: Part 1 Control charts for variables (second revision)
IS 443 Methods of test for rubber and plastics - Tubing, hoses and hose assemblies:
(Part 3) : 2023/ISO 1402 : 202 Rubber and plastics hoses and hose assemblies - Hydrostatic testing (fourth revision)
IS 443 (Part 8) : 2023/ISO 4671 : 2022 Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
IS 3400 Methods of test for vulcanized rubber:
(Part 1) : 2021/ISO 37 : 2017 Tensile stress-strain properties (fourth revision)
IS 3400 (Part 4) : 2012/ISO 188 : 2011 Accelerated ageing and heat resistance (third revision)
IS 3400 (Part 5) : 2022/ISO 36 : 2020 Methods of test for rubber, vulcanized or thermoplastic: Part 5 Adhesion of rubbers to textile fabrics (fourth revision)
IS 7503 : 2018/ISO 1382 : 2012 Glossary of terms used in rubber industry
IS 4905 : 2015/ISO 24153 : 2009 Random sampling and randomization procedures (first revision)