IS 13122 : Part 1 : 1993 Transmitters for Use in Industrial-Process Control Systems - Specification - Part 1 : Methods for Evaluating the Performance
UDC 621.396.61 : 65.011.56 : 621 - 523 | ETD 18 |
|
Reaffirmed 2021 |
1 Scope
1.1 This standard is applicable to transmitters which haveeither a standard electric current output signal as per IS 7728 :1984 or a standard pneumatic output signal is accordance with IS7722 : 1975, or a standard voltage output signal as per IS 8493 :1977.
1.2 The tests detailed herein may be applied to transmitterswhich have other output signals, provided that due allowance ismade for such difference.
1.3 Transmitters for the measurement of electrochemicalproperties, such as pH transmitters, are not covered by thisstandard.
2 References
IS 7722 :1975Analogue pneumatic signals for processcontrol systems
IS 7728 :1984Analogue dc current signals for processcontrol systems
IS 8493 :1977Analogue dc voltage signals for industrialprocess measurements and control systems
IS9000Basic environmental testing procedures forelectronic and electrical items
Part 2 : Sec 1 to 4 :1977 Cold test, Section 1 General,Section 2Cold test for non heat dissipating itemswith sudden change of temperature, Section3 Cold test for non-heat dissipating itemwith gradual change of temperature,Section 4 Cold test for heat dissipatingitems with gradual change of temperature
Part 3 : Sec 1 to 3 :1988 Dry heat test, Section 1 General,Section2 and Section 3 Dry heat test for non-heatdissipating items with sudden change oftemperature
Part 4 :1979Damp heat (steady state)
Part 5 : Sec 1 and 2 :1981 Damp heat (cyclic) testSection 1 16 + 8 h cycle,Section 2 12 + 12 h cycle
Part 7 : Sec 3 :1979 Impact test,Section 3 Drop and topple
Part 8 :1981Vibration (sinusoidal) test
Part 14 : Sec 1 to 3 : 1988 Test N : Changeof temperature, Section 1Test Na: Rapid change of temperature(thermal shock) with prescribed time oftransition-two chamber method, Section 2Test Nb: Change of temperature(temperature cycling) with specified rateof change-one chamber method, Section 3Test Nc: Rapid change of temperature(thermal shock) - Two fluid bath method