IS 13573 : Part 2 : 2011 : Cable Accessories for Extruded Power Cables - Part 2 for Working Voltages for 3.3kV(UE) upto and Including 33kV(E) - Test Requirements

Reaffirmed 2021

FOREWORD

This Indian Standard (Part 2) (First Revision) was adopted by the Bureau of Indian Standards, after the draft finalized by the Power Cables Sectional Committee had been approved by the Electrotechnical Division Council.

There are different methods followed for joints and terminations and the basic technique depends on the voltage rating of the power cable for which the accessories needs to be installed.

This standard was first published as IS 13573 : 1992 ‘Joints and terminations of polymeric cables for working voltages from 6.6 kV up to and including 33 kV — Performance requirements and type tests’. This revision has been undertaken to bring it in line with international practices. It has been split up into three parts. Other parts in the series are:

Part 1 For working voltages from 1.1 kV up to and including 3.3 kV(E) — Test methods and test requirements

Part 3 For working voltages from 3.3 kV(UE) up to and including 33 kV(E) — Test methods