NATIONAL FOREWORD

This Indian Standard (Part 39) (First Revision) which is identical with IEC 60317-39 : 2015 ‘Specifications for particular types of winding wires — Part 39: Glass-fibre braided resin or varnishimpregnated, bare or enamelled rectangular copper wire, temperature index 180’ issued by the International Electrotechnical Commission (IEC) was adopted by the Bureau of Indian Standards on the recommendation of the Winding Wires Sectional Committee and approval of the Electrotechnical Division Council.

This standard was originally published in 2005 and was based on IEC 60317-39 : 1992 ‘Specifications for particular types of winding wires — Part 39: Glass-fibre braided, polyester or polyesterimide, varnishtreated, bare or enamelled rectangular copper wire, temperature index 180’ issued by the International Electrotechnical Commission (IEC). The first revision of this standard has been undertaken up to align it with the latest version of IEC 60317-39 : 2015.

The major changes in this revision are as follows:

a) Revision to Clause 2, Normative references;

b) Addition of new 3.2.2 containing general notes on winding wire, formerly a part of the scope; and

c) Revision to references to is 13730 (Part 0/Section 5) : 2012 to clarify that their application is normative.

The text of IEC Standard has been approved as suitable for publication as an Indian Standard without deviations. Certain terminologies and conventions are, however, not identical to those used in Indian Standards. Attention is particularly drawn to the following:

a) Wherever the words ‘International Standard’ appear, referring to this standard, they should be read as ‘Indian Standard’.

b) Comma (,) has been used as a decimal marker, while in Indian Standards, the current practice is to use a point (.) as the decimal marker.