Revised Standard from Last Update.

1. SCOPE

This part of IS 13902 specifies the special requirements for materials and method of manufacture of sockets produced by forging or by machining from the solid. The general characteristics, critical dimensions, prototype test requirements, general quality control and conditions of acceptance are dealt with in IS 13902 (Part 1).

2. REFERENCES

The standards listed below contain provisions which, through reference in this text, constitute provisions of this standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards listed below. In case the standards are to be referred in this clause they are to be listed as follows:

13902 (Part 1) : 1993 Sockets for wire ropes for general purposes - Part 1 General characteristics and conditions of acceptance.

14962 (Part 1) : 2018/ISO 965-1 : 2013 General purpose metric screw threads - Tolerances - Part 1 Principles and basic data (first revision).

4218 (Part 2) : 2001/ISO 261 : 1998 General purpose metric screw threads - Part 2 General plan (second revision)

7587 (Part 1) : 2020 Cage suspension gear for winding in mines: Part 1 General requirements (second revision)