IS 13902 : Part 3 : 1993/ISO 3189-3 : 1985 Socket for wire ropes for general purposes: Part 3 Special requirements for sockets produced by casting
| UDC 621.827.174 : 677.721 | MED 10 |
|
| Reaffirmed 2022 |
National Foreword
This Indian Standard which is identical to ISO 3189/3 : 1985`Sockets for wire ropes for general purposes - Part 3 Specialrequirements for sockets produced by casting' issued byInternational Organization for Standardization (ISO), was adoptedby the Bureau of Indian Standards on the recommendation of the WireRopes and Wire Products Sectional Committee, (HMD 10) and approvalof the Heavy Mechanical Engineering Division Council.
This standard has been issued in several parts. The other partsof this Indian Standard are:
IS 13902 : Part 1Sockets for wire ropes for general purposes :Part 1 General Characteristics and conditions ofacceptance
IS 13902 : Part 2Sockets for wire ropes for general purposes :Part 2 Special requirements for sockets produced byforging or machined from the solid
| International Standard | Corresponding Indian Standard |
| ISO 261 :1973 | IS 4218 : Part 2 : 1972 ISO Metricscrew threadsPart 2 Diameter pitch combination |
| ISO 965/1 : 1980 | IS 4218 : Part 4 : 1976 ISO Metricscrew threadsPart 4 Tolerancing system |
| ISO 965/2 : 1980 | IS 4218 : Part 6 : 1978 ISO Metricscrew threadsPart 6 Limits of sizes for commercial bolts andnuts (diameter range 1 to 52 mm) |
| ISO 965/3 : 1980 | IS 4218 : Part 5 : 1979 ISO Metricscrew threadsPart 5 Tolerances |
| ISO 3189/1 : 1985 | IS 13902 : Part 1 : 1993 Socketsfor wire ropesfor general purposes :Part 1 General characteristics and conditions ofacceptance |
| ISO 3189/2 : 1985 | IS 13902 : Part 2 : 1993 Socketsfor wire ropesfor general purposesPart 2 Special requirements for sockets producedby forging or machined from the solid |