IS 14416 : 1996 Bulk Handling Equipment - Boom Type Bucket Wheel Reclaimer - Rail Mounted - Design, Manufacture and Erection - Code of Practice

1 Scope

This standard covers mechanical, structural, inspection andtesting requirements relating to design, manufacture and erectionof rail mounted bucket wheel reclaimers.

2 References

IS 919 : Part 1 :1993ISO system of limits and fits:Part 1 Basis of tolerances, deviationsand fits

IS 1136 :1990Preferred sizes for wrought metalproducts

IS 1363 : Part 1 :1992Hexagon head bolts, screws and nuts ofproduct grade C:Part 1 Hexagon head bolts (size rangeM5 to M64)

IS 1363 : Part 2 :1992Hexagon head bolts, screws and nuts ofproduct grade C:Part 2 Hexagon head screws (size rangeM5 to M64)

IS 1363 : Part 3 :1992Hexagon head bolts, screws and nuts ofproduct grade C:Part 3 Hexagon head nuts (size range M5to M64)

IS 1364 : Part 1 :1992Hexagon head bolts, screws and nuts ofproduct grades A and B:Part 1 Hexagon head bolts (size range M1.6 to M64)

IS 1364 : Part 2 :1992Hexagon head bolts, screws and nuts ofproduct grades A and B:Part 2 Hexagon head screws (size rangeM1.6 to M64)

IS 1364 : Part 3 :1992Hexagon head bolts, screws and nuts ofproduct grades A and B:Part 3 Hexagon nuts (size range M1.6 toM64)

IS 1364 : Part 4 :1992Hexagon head bolts, screws and nuts ofproduct grades A and B: Part 4 Hexagon thin nuts (chamfered)(size range M1.6 to M64)

IS 1364 : Part 5 :1992Hexagon head bolts, screws and nuts ofproduct grades A and B:Part 5 Hexagon thin nuts (unchamfered)(size range M1.6 to M64)

IS 1367 : Part 1 :1980Technical supply conditions for threaded steelfasteners:Part 1 Introduction and generalinformation

IS 1367 : Part 2 :1979Technical supply conditions forthreaded steel fasteners:Part 2 Product grades and tolerances

IS 1367 : Part 3 :1991Fasteners - Threaded steel - Technicalsupply conditions:Part 3 Mechanical properties and testmethods for bolts, screws and studswith full loadability

IS 1367 : Part 5 :1980Technical supply conditions forthreaded steel fasteners:Part 5 Mechanical properties and testmethods for set screws and similarthreaded fasteners not under tensilestresses

IS 1367 : Part 6 :1994Technical supply conditions forthreaded steel fasteners:Part 6 Mechanical properties and testmethods for nuts with specified proofloads

IS 1367 : Part 7 :1980 Technical supply conditionsforthreaded steel fasteners:Part 7 Mechanical properties and testmethods for nuts without specifiedproof loads

IS 1367 : Part 8 :1992Technical supply conditions forthreaded steel fasteners:Part 8 Mechanical and performanceproperties for prevailing torque typesteel haxagon nuts

IS 1367 : Part 2 : Sec 1 : 1993 Technical supplyconditions forthreaded steel fasteners:Part 9 Surface discontinuities,Section 1 Bolts, screws and studs forgeneral applications

IS 1367 : Part 9 : Sec 2 :1993 Technical supply conditions forthreaded steel fasteners:Part 9 Surface discontinuities,Section 2 Bolts, screws and studs for special applications

IS 1367 : Part 10 :1979Technical supply conditions forthreaded steel fasteners:Part 10 Surface discontinuities on nuts

IS 1367 : Part 12 :1981Technical supply conditions forthreaded steel fasteners:Part 12 Phosphate coatings on threaded fasteners

IS 1367 : Part 13 :1983Technical supply conditions forthreaded steel fasteners:Part 13 Hot-dip galvanized coatings onthreaded fasteners

IS 1367 : Part 14 :1984Technical supply conditions forthreaded steel fasteners:Part 14 Stainless steel threadedfasteners

IS 1367 : Part 16 :1979Technical supply conditions forthreaded steel fasteners:Part 16 Designation system and symbols

IS 1367 : Part 18 :1979Technical supply conditions forthreaded steel fasteners:Part 18 Marking and mode of delivery

IS 2016 :1967Plain washers

IS 2266 :1989Steel wire ropes for generalengineering purposes

IS 3177 :1977Code of practice for electric overheadtravelling cranes and gantry cranesother than steel work cranes

IS 5372 :1975 Taperwashers for channels (ISMC)

IS 5374 :1975Taper washers for I-beams (ISMB)

IS 11592 :1985Code of practice for selection anddesign of belt conveyors

IS 13148 :1991Bulk handling equipment - Mobilecontinuous type - Rule for design ofstructures