IS 14417 : 1996 Bulk handling equipment - Single boom slewable stacker - Rail mounted - Design, manufacture and erection - Code of practice

1 Scope

This standard covers mechanical, structural, electrical,inspection and testing requirements relating to design, manufactureand erection of rail mounted slewable stackers.

2 References

List of Referred Indian Standards

IS 919 : Part 1 :1993ISO system of limits and fits:Part 1 Basis of tolerances, deviationsand fits

IS 1136 :1958Preferred sizes for wrought metalproducts

IS 1364 : Part 1 :1992Hexagon head bolts, screws and nuts ofproduct grade A and B :Part 1 Hexagon head bolts (size rangeM1.6 to M64)

IS 1364 : Part 2 :1992Hexagon head bolts, screws and nuts ofproduct grade A and B :Part 2 Hexagon head screws (size rangeM1.6 to M64)

IS 1364 : Part 3 :1992Hexagon head bolts, screws and nuts ofproduct grade A and B : Part 3 Hexagon nuts(size range M1.6 toM64)

IS 1364 : Part 4 :1992Hexagon head bolts, screws and nuts ofproduct grade A and B :Part 4 Hexagon thin nuts (chamfered)(size range M1.6 to M64)

IS 1364 : Part 5 :1992Hexagon head bolts, screws and nuts of product grade A and B :Part 5 Hexagon thin nuts (unchamfered)(size range M1.6 to M10)

IS 1367 : Part 1 :1980Technical supply conditions for threadedsteel fasteners:Part 1 Introduction and generalinformation

IS 1367 : Part 2 :1979Technical supply conditions for threadedsteel fasteners:Part 2 Product grades and tolerances

IS 1367 : Part 3 :1991Fasteners - Threaded steel - Technicalsupply conditions:Part 3 Mechanical properties and testmethods for bolts, screws and studs withfull loadability

IS 1367 : Part 5 :1980Technical supply conditions for threadedsteel fasteners:Part 5 Mechanical properties and testmethods for set screws and similarthreaded fasteners not under tensilestresses

IS 1367 : Part 6 :1994Technical supply conditions for threadedsteel fasteners:Part 6 Mechanical properties and testmethods for nuts with specified proofloads

IS 1367 : Part 7 :1980Technical supply conditions for threadedsteel fasteners:Part 7 Mechanical properties and testmethods for nuts without specified proofloads

IS 1367 : Part 8 :1992Technical supply conditions for threadedsteel fasteners:Part 8 Mechanical and performanceproperties for prevailing torque typesteel haxagon nuts

IS 1367 : Part 9 : Sec 1 :1993 Technical supply conditions for threadedsteel fasteners:Part 9 Surface discontinuitiesSection 1 Bolts, screws and studs forgeneral applications

IS 1367 : Part 9 : Sec 2 :1993 Technical supply conditions for threadedsteel fasteners:Part 9 Surface discontinuitiesSection 2 Bolts, screws and studs forspecial applications

IS 1367 : Part 10 :1979Technical supply conditions for threadedsteel fasteners:Part 10 Surface discontinuities on nuts

IS 1367 : Part 12 :1981Technical supply conditions for threadedsteel fasteners:Part 12 Phosphate coatings on threadedfasteners

IS 1367 : Part 13 :1983Technical supply conditions for threadedsteel fasteners: Part 13 Hot-dip galvanizedcoatings onthreaded fasteners

IS 1367 : Part 14 :1984Technical supply conditions for threadedsteel fasteners:Part 14 Stainless steel threadedfasteners

IS 1367 : Part 16 :1979Technical supply conditions for threadedsteel fasteners:Part 16 Designation system and symbols

IS 1367 : Part 18 :1979Technical supply conditions for threadedsteel fasteners:Part 18 Marking and mode of delivery

IS 2016 :1967Plain washers

IS 2266 :1989Steel wire ropes for general engineeringpurposes

IS 3177 :1977Code of practice for overhead travelingcranes and gantry cranes other thansteel work cranes

IS 5372 :1975Taper washers for channels (ISMC)

IS 5374 :1974Taper washers for I-beams (ISMB)

IS 8593 : Part 1 :1977Recommendations for centralizedlubrication as applied to plant andmachinery:Part 1 Oil lubrication

IS 8593 : Part 2 :1988 Recommendations for centralizedlubrication as applied to plant andmachinery:Part 2 Grease lubrication

IS 8593 : Part 3 :1984Recommendations for centralizedlubrication as applied to plant andmachinery:Part 3 Aerosol lubrication

IS 11592 :1985Code of practice for selection anddesign of belt conveyors

IS 13148 :1991Bulk handling equipment - Mobilecontinuous type - Rule for design ofstructures