IS 1448 : Part 142 : 2021 Methods of Test for Petroleum and its Products - Part 142 Determination of Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer
Revised Standard from Last Update.
1 SCOPE
1.1 This standard (Part 142) describes a test method by rapid portable equipment, that can be used in field and laboratory use to rate the ability of aviation turbine fuels to release entrained or emulsified water when passed through fiberglass coalescing material.
1.2 This test method contains two different modes of operating test equipment based on rate of fuel flow through the fiberglass coalescing material. The test methods are dependent on the particular fuel to be tested.
WARNING — The use of this document can involve hazardous materials, operations and equipment. This Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of users of this standard to take appropriate measures to ensure the safety and health of personnel prior to the application of the standard, and to determine the applicability of regulatory limitations and any other restrictions for this purpose.
2 REFERENCES
The standards given below contain provisions which, through reference in this text, constitute provisions of this standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of these standards.
1070 : 1992 Reagent grade water — Specification (third revision)
1448 (Part 137) : 1991 Methods of test for petroleum and its products: Part 137 Water separation characteristics of aviation turbine fuels