IS 14511 : Part 2 : 2007/ISO 8984-2 : 1993 Diesel Engines - Testing of Fuel Injectors : Part 2 - Test Methods
ICS 43.060.40 | TED 2 |
|
Reaffirmed 2018 |
National Foreword
This Indian Standard (Part 2) (First Revision) which is identical with ISO 8984-2 : 1993 Dieselengines - Testing of fuel injectors - Part 2: Test methods issued by the International Organizationfor Standardization (ISO) was adopted by the Bureau of Indian Standards on the recommendation ofthe Automotive Primemovers, Transmissions and Steering Systems and Internal Combustion EnginesSectional Committee and approval of the Transport Engineering Division Council.
The sectional committee decided to align the Indian Standard with the corresponding InternationalStandards recommendation wherever feasible and wherever the domestic considerations were not sointense so as to have standards different from the ISO Standards. This decision was taken with a viewto upgrade the quality of the products in line with the International Standards.
This standard was first published in 1998. The first revision was undertaken due to revision of thebase standard as indicated above. At the time the standard has been splitted into two of revision,parts, Other part in the series is:
Part 1 Hand-lever-operated testing and setting apparatus
The text of ISO Standard has been approved as suitable for publication as an Indian Standard without deviations. Certain conventions are, however, not identical to those used in Indian Standards.Attention is patiicularly drawn to the following:
a) Wherever the words ?International Standard? appear referring to this standard, they shouldbe read as ?Indian Standard?.
b) Comma (,) has been used as a decimal marker, while in Indian Standards, the currentpractice is to use a point (.) as the decimal marker.
In this adopted standard, reference appears to the following International Standard for which Indian Standard also exists. The corresponding Indian Standard which is to be substituted in its place is listed below along with its degree of equivalence for the edition indicated:
International Standard | Corresponding Indian Standard |
ISO 8984-1 : 1993 | IS 14511 : Part 1 : 2007 Diesel engines - Testing of fuel injectors: Part 1 Hand-lever- operated testing and setling apparatus (first revision) |
ISO 4008-3 : 1987 | -- |
ISO 4113 : 1988 | -- |
ISO 7440-1 : 1991 | -- |