1. SCOPE

This standard prescribes requirements and methods of sampling and test of kerosene intended for use as an illuminant and as a fuel.

2. REFERENCES

The standards given below contain provisions which, through reference in this text, constitute provisions of this standard. At the time of publication the editions indicated were valid. All standards are subject to revision, and parties to agreements based on the standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below:

1260 (Part 1) : 1973 Pictorial marking for handling and labeling of goods: Part 1 Dangerous good (first revision)

1447 (Part 1) : 2000 Petroleum and its products — Methods of sampling: Part 1 Manual sampling (first Revision)

1448 Method of test for petroleum and its products:

[P : 2] : 2007 Part 2 Petroleum products and lubricants — Neutralization number — Potentiometric titration method

[P : 5] : 1970 Part 5: Burning quality

[P : 13] : 1960 Part 13: Colour by lovibond tintometer

[P : 14] : 1960 Part 14 : Colour by saybolt chronometer

[P : 15] : 2004/ISO 2160 : 1998 Petroleum products — Corrosiveness to copper — Copper strip test

[P : 16] : 2016 Part 16: Crude petroleum and liquid petroleum products — Laboratory determination of density — Hydrometer method

[P : 18] : 1991 Part 18 Distillation of petroleum products

[P : 20] : 1998 Part 20 Determination of flash point by Abel apparatus

[P : 31] : 1968 Part 31 Smoke point

[P : 34] : 1979 Determination of sulphur in petroleum products lamp (second revision)