IS 14593 : 1998 Design and construction of bored cast-in-situ piles founded on rocks - Guidelines

1 SCOPE

This standard covers the design of load bearing concrete boredcast-in-situ piles of diameter less than or equal to 1 500 mm whichtransmit the load of the structure to the rock through resistancedeveloped either at the pile tip by end bearing or along theinterface surface by pile rock adhesion or through both.

This standard does not cover well foundations.

2 References

IS 456 :1978Code of practice for plain and reinforcedconcrete

IS 1892 :1979Code of practice for subsurface investigationfor foundation

IS 2131 :1981Method of standard penetration test for soils

IS 2809 :1972Glossary of terms and symbols relating tosoil engineering

IS2911Code of practice for design and constructionof pile foundations

Part 1 : Sec 1 to 3 : 1979 Concrete piles

Part 4 :1985Load test on piles

IS 4651 : Part 4 :1989 Code ofpractice for planning and design ofports and harbours:Part 4 General design consideration

IS8009Code of practice for calculation ofsettlement of foundations:

Part 1 :1976Shallow foundations subjected to symmetricalstatic vertical loads

Part 2 :1980Deep foundations subjected to symmetricalstatic vertical loading

IS 11358 :1987Glossary of terms and symbols relating torock mechanics

IS 12070 :1987Code of practice for design and constructionof shallow foundations on rocks

IS 13063 :1991Code of practice for structural safety ofbuildings on shallow foundation in rocks