IS 14611 : 2024 Multilayered Cross Laminated Sheets/Tarpaulins/Covers/ Agricultural Films - Specification

ICS 83.140.20

PCD 12

1 SCOPE

1.1 This standard prescribes the requirements, constructional details, method of sampling and tests for multilayered cross laminated sheets, tarpaulins, covers and agricultural films intended for packing, ground covers (mulching), water conservation systems and fumigation covers, agricultural operations, horticulture, etc.

1.2 Plastic films for greenhouses are not cover under this standard. For plastic films for greenhouses a separate standard, IS 15827 has been published.

2 REFERENCES

The standards listed in Annex A contain provisions which, through reference in this text, constitute provisions of this standard. At the time of publication, the editions indicated were valid. All standards are subjected to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent edition of these standards.

IS No. Title
IS 1070 : 2023 Reagent grade water - Specification (fourth revision)
IS 1969 (Part 1) : 2018/ISO 13934-1 : 2013 Textiles - Tensile properties of fabrics: Part 1 Determination of maximum force and elongation at maximum force using the strip method (fourth revision)
IS 2244 : 1972 Glossary of terms relating to treated fabrics (first revision)
IS 2508 : 2016 Polyethylene films and sheets - Specification (third revision)
IS 4905 : 2015/ISO 24153 : 2009 Random sampling and randomization procedures (first revision)
IS 7016 Methods of test for rubber or plastics coated fabrics:
(Part 1) Determination of roll characteristics,
(Sec 1) : 2022/ISO 2286-1 : 2016 Methods for determination of length, width and net mass (third revision)
(Sec 2) : 2019/ISO 2286-2 : 2016 Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (second revision)
(Sec 3) : 2019/ISO 2286-3 : 2016 Method for determination of thickness (second revision)
(Part 4) : 2003/ISO 7854 : 1995 Rubber- or plastic-coated fabrics - Determination of resistance to damage by flexing (second revision)
(Part 7) : 2023/ISO 1420 : 2016 Determination of resistance to penetration by water (third revision)
(Part 8) : 2023/ISO 1419 : 2019 Accelerated ageing (first revision)
IS 13360 Plastics - Methods of testing:
(Part 5) Mechanical properties,
(Sec 1):2021/ISO 527-1 : 2019 Determination of tensile properties - General principles (second revision)
(Sec 3):2022/ISO 527-3 : 2018 Determination of tensile properties - Test condition for film and sheeting (second revision)
(Sec 6) : 1999/ISO 7765-1 : 1988 Determination of impact resistance by the free-falling dart method - Staircase methods
IS 15827 : 2019 Cladding films for greenhouse/polyhouse - Specification (first revision)