IS 14946 : 2001 Zinc Ethyl Silicate Primer, Two Components - Specification

1 Scope

This standard prescribes requirements, sampling and method oftest for zinc ethyl silicate primer. This material shall be usedfor the painting of steel paint equipments, by spraying, wherecorrosion protection, chemical resistance under marine atmosphericcondition, abrasion and heat resistance are required.

2 References

IS101Methods of sampling and test for paints,varnishes and related products:

Part 1 : Sec 1 : 1986Test on liquid paints (general and physical),Section 1 Sampling

Part 1 : Sec 3 : 1986Test on liquid paints (general and physical),Section 3 Preparation of panels

Part 1 : Sec 5 : 1989Test on liquid paints (general and physical),Section 5 Consistency

Part 1 : Sec 6 : 1987Test on liquid paints (general and physical),Section 6 Flash Point

Part 1 : Sec 7 : 1987Test on liquid paints (general and physical),Section 7 Mass per 10 litres

Part 2 : Sec 2 : 1986Test on liquid paints (Chemical examination),Section 2 Volatile matter

Part 3 : Sec 1 : 1986Tests on paint film formation,Section 1 Drying time

Part 3 : Sec 2 : 1989Tests on paint film formation,Section 2 Film thickness

Part 3 : Sec 4 : 1987Tests on paint film formation,Section 4 Finish

Part 4 : Sec 2 : 1988Optical tests on paint films,Section 2 Colour

Part 6 : Sec 1 : 1988Durability tests,Section 1 Resistance to humidity underconditions of condensation

Part 6 : Sec 2 : 1989Durability tests,Section 2 Keeping properties

Part 7 : Sec 3 : 1990Environmental tests on paint films,Section 3 Resistance to heat

Part 8 : Sec 6 : 1993Tests for pigments and other solids,Section 6 Volume solids

IS 266 :1993Sulphuric acid

IS 1070 :1992Reagent grade water

IS 1260 : Part 1 :1973 Pictorial marking for handling andlabelling ofgoods:Part 1 Dangerous goods

IS 1303 :1983Glossary of terms relating to paints

IS 1499 :1977Method for charpy impact test for metals

IS 1608 :1995Mechanical testing of metals - Tensile testing

IS 14355 :1996Zinc dust pigment for paints