IS 14961 : 2024 Surface Water Management in Hilly Areas (Including Rainwater Harvesting) - Guidelines

ICS 13.060.10; 13.060.20

CED 56

1 SCOPE

This standard provides guidelines for surface water management in hilly areas, with a focus on sustainable practices and the integration of rainwater harvesting techniques.

2 REFERENCES

The standards listed in Annex A contain provisions, which through references in this text constitute provisions of this standard. At the time of publication, the editions indicated were valid. All standards are subject to revision and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent edition of these standards.

IS No. Title
IS 277 : 2018 Galvanized steel strips and sheets (plain and corrugated) - Specification (seventh revision)
IS 459 : 1992 Corrugated and semicorrugated asbestos cement sheets - Specification (third revision)
IS 804 : 1967 Specification for rectangular pressed steel tanks (first revision)
IS 1239 (Part 1) : 2004 Steel tubes, tubulars and other wrought steel fittings - Specification: Part 1 Steel tubes (sixth revision)
IS 1254 : 2007 Corrugated aluminium sheet (fourth revision)
IS 1536 : 2023 Centrifugally cast (spun) iron pressure pipes for water, gas and sewage - Specification (fifth revision)
IS 1626 Asbestos cement building pipes and pipe fittings, gutters and gutter fittings and roofing fittings - Specification:
(Part 1) : 1994 Pipe and pipe fittings (second revision)
(Part 2) : 1994 Gutters and gutter fittings (second revision)
(Part 3) : 1994 Roofing fittings (second revision)
IS 1729 : 2023 Sand cast iron spigot and socket pipes, fittings and accessories - Specification (third revision)
IS 2096 : 1992 Asbestos cement flat sheets - Specification (first revision)
IS 2527 : 1984 Code of practice for fixing rainwater gutters and downpipes for roof drainage (first revision)
IS 2752 : 1995 Activated carbons, granular - Specification (third revision)
IS 3951 Hollow clay tiles for floors and roofs - Specification:
(Part 1) : 2023 Filler type (third revision)
(Part 2) : 2023 Structural type (third revision)
IS 3989 : 2024 Centrifugally cast (spun) iron spigot and socket pipes, fittings and accessories - Specification (fourth revision)
IS 4984 : 2016 Polyethylene pipes for water supply - Specification (fifth revision)
IS 4985 : 2021 Unplasticized PVC pipes for water supplies - Specification (fourth revision)
IS 6250 : 1981 Specification for roofing slate tiles (first revision)
IS 8419 : 2023 Underdrainage system of rapid sand gravity filtration equipment - Requirements (first revision)
IS 10388 : 1982 Specification for corrugated coir, woodwool, cement roofing sheets
IS 11401 Requirements for slow sand filters:
(Part 1) : 1985 General guidelines
(Part 2) : 1990 Design, construction, operation and maintenance
IS 12583 : 1988 Specification of corrugated bitumen roofing sheets
IS 12701 : 1996 Rotational moulded polyethylene water storage tanks - Specification (first revision)
IS 12709 : 1994 Glass fibre reinforced plastic (GRP) pipes joints and fittings for use for potable water supply - Specification (first revision)
IS 13000 : 1990 Silica-asbestos-cement flat sheets - Specification
IS 13008 : 1990 Shallow corrugated asbestos cement sheets - Specification
IS 13317 : 2023 Clay roofing country tiles, half round and flat tiles - Specification (first revision)
IS 13356 : 1992 Precast ferrocement water tanks up to 10 000 litres capacity - Specification
IS 13592 : 2013 Unplasticized polyvinyl chloride (PVC-U) pipes for soil and waste discharge system for inside and outside buildings including ventilation and rainwater system - Specification (first revision)
IS 14243 Selection and development of site for building in hill areas - Guidelines:
(Part 1) : 1995 Microzonation of urban centres
(Part 2) : 1995 Selection and development
IS 14246 : 2024 Continuously pre-painted galvanized steel sheets and strips - Specification (second revision)
IS 14399 Hot press moulded thermosetting glass fibre reinforced polyester resin (GRP) sectional water storage tanks:
(Part 1) : 1996 Specification for panels
(Part 2) : 1996 Guidelines for assembly, installation and testing
IS 14606 : 2022 Irrigation equipment - Granulated media filters - Specification (first revision)
IS 14862 : 2000 Fibre cement flat sheets - Specification
IS 14735 : 1999 Unplasticized polyvinyl chloride (UPVC) injection moulded fittings for soil and waste discharge system for inside and outside buildings including ventilation and rainwater system - Specificaion
IS 14871 : 2000 Products in fibre reinforced cement - Long corrugated or asymmetrical section sheets and fittings for roofing and cladding - Specification
IS 15778 : 2007 Chlorinated polyvinyl chloride (CPVC) pipes for potable hot and cold water distribution supplies - Specification
IS 15797 : 2008 Roof top rainwater harvesting - Guidelines
IS 16647 : 2017 Oriented unplasticized polyvinyl chloride (PVC-O) pipes for water supply - Specification
IS 17955 : 2023 Sand and gravel for use as filtration medium - Specification