Reaffirmed 2024

NATIONAL FOREWORD

This Indian Standard (First Revision) which is identical with ISO 10321 : 2008 'Geosynthetics - Tensile test for joints/seams by wide-width strip method' issued by the International Organization for Standardization (ISO) was adopted by the Bureau of Indian Standards on the recommendation of the Geosynthetics Sectional Committee and approval of the Textile Division Council.

This standard was first published in 2001 and has been revised again to align it with the latest version of ISO 10321 : 2008.

The conditioning temperature of 20±2°C as specified in International Standards is not suitable for tropical countries like India where the atmospheric temperature is normally much higher than 20°C. It is almost impossible to maintain this temperature specially during summer when the atmospheric temperature rises even up to 50°C. In view of the above, IS 6359 : 1971 'Method for conditioning of textiles' which specifies a temperature of 27 ± 2°C for conditioning of the test specimens for the tropical countries like India shall be referred.

The text of ISO Standard has been approved as suitable for publication as an Indian Standard without deviations. Certain conventions are, however, not identical to those used in Indian Standards. Attention is particularly drawn to the following:

a) Wherever the words 'International Standard' appear referring to this standard, they should be read as 'Indian Standard'.

b) Comma (,) has been used as a decimal marker while in Indian Standards, the current practice is to use a point (.) as the decimal marker.