IS 15247 : 2002/ISO 9270 : 1992 7/24 Tapers for Tool Shanks for Automatic Changing - Tapers for Spindle Noses
| ICS 621.9.022-229.2 | PGD 35 |
|
| Reaffirmed 2019 |
National Foreword
This Indian Standard which is identical with ISO 9270 : 1992`7/24 Tapers for tool shanks for automatic changing - Tapers forspindle noses issued by the International Organization forStandardization (ISO) was adopted by the Bureau of Indian Standardson the recommendations of Machine Tool Elements and Holding DevicesSectional Committee and approval of the Basic and ProductionEngineering Division Council.
References
| International Standard | Corresponding Indian Standard |
| ISO 898-1 : 1988 | IS 1367 : Part 3 : 1991 Technical supply conditions for threaded steel |
| fasteners: |
| Part 3 Mechanical properties and test methods for bolts, screws and |
| studs with full loadabilities |
| ISO 1947 : 1973 | IS 7615 : 1993 System of cone tolerances for conical workpieces |
| from C = 1 : 3 to 1 : 500 and lengths from 6 to 630 mm |
| ISO 4762 : 1989 | IS 2269 : 1995 Fasteners - Hexagon socket head cap screws |
| ISO 7388-1 : 1983 | IS 11173 : Part 1 : 1985 Recommendations for tool shanks 7/24 |
| taper for numerically controlled machine tools with automatic tool changers (tools rotating type): |
| Part 1 Tool shanks |