IS 15326 : Part 1 : 2024/ISO 3834-1 : 2021 Quality Requirements for Fusion Welding of Metallic Materials - Part 1 Criteria for the Selection of the Appropriate Level of Quality Requirements
NATIONAL FOREWORD
This Indian Standard (Part 1) (Second Revision) which is identical to ISO 3834-1 : 2021 'Quality requirements for fusion welding of metallic materials — Part 1: Criteria for the selection of the appropriate level of quality requirements' issued by the International Organization for Standardization (ISO) was adopted by the Bureau of Indian Standards on the recommendation of the Welding General and its Applications Sectional Committee and approval of the Metallurgical Engineering Division Council.
This standard was first published in 2003 and subsequently revised in 2018. This revision has been undertaken to align it with the latest version of ISO 3834-1 : 2021 under dual numbering system to harmonize it with the latest developments that have taken place at international level.
This standard is published in five parts. Other parts of this standard are:
Part 2 | Comprehensive quality requirements |
Part 3 | Standard quality requirements |
Part 4 | Elementary quality requirements |
Part 5 | Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 |
This edition cancels and replaces the previous edition, which has been technically revised. The main changes are as follows:
a) this document has been editorially revised; and
b) references to subclauses in ISO 9001 have been updated.
The text of ISO standard has been approved as suitable for publication as an Indian Standard without deviations. Certain terminologies and conventions are, however, not identical with those used in Indian Standard. Attention is especially drawn to the following:
a) Wherever the words 'International Standard' appear referring to this standard, it should be readas 'Indian Standard'; and
b) Comma (,) has been used as a decimal marker while in Indian Standards the current practiceis to use a point (.) as the decimal marker.