IS 15489 : 2024 Paint, Plastic Emulsion - Specification

ICS 87.040

CHD 20

1 SCOPE

This standard prescribes the requirements and methods of sampling and test for plastic emulsion paint used for interior and exterior protection and decoration of building surfaces after surface preparation and priming.

2 REFERENCES

The standards listed in Annex A contain provisions, which through reference in this text, constitute provisions of this standard. At the time of publication, the editions indicated were valid. All standards are subject to revision and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent edition of these standards.

IS No. Title
IS 101 Methods of sampling and test for paints, varnish and related products:
(Part l) Test on liquid paints (general and physical),
(Sec 1) : 2023 Sampling (third revision)
(Sec 3) : 1986 Preparation of panels (third revision)
(Sec 7) : 2020/ISO 2811-1 : 2016 Mass per 10 litres - Determination of density - Pycnometer method (fourth revision)
(Part 2) Test on liquid paints (chemical examination),
(Sec 1) : 2018 Water content (fourth revision)
(Sec 2) : 1986 Volatile matter (third revision)
(Sec 3) : 2015/ISO 11890-1 : 2007 Determination of volatile organic compound (VOC) content - Difference method
(Sec 4) : 2022/ISO 11890-2 : 2020 Determination of volatile organic compound (VOC) and or semi volatile organic compounds (SVOC) content gas-chromatographic (first revision)
(Part 3/Sec 1) : 1986 Tests on paint film formation, Section 1 Drying time (third revision
(Part 4) Optical tests,
(Sec 2) : 2021/ISO 3668 : 2017 Colour-visual comparison of colour of paints (fourth revision)
(Sec 3) : 1988 Light fastness test (third revision)
(Sec 4) : 2020/ISO 2813 : 2014 Gloss - Determination of gloss value at 20°, 60° and 85° (fourth revision)
(Part 6) Durability tests,
(Sec 1) : 1988 Resistance to humidity under conditions of condensation (third revision)
(Sec 2) : 1989 Keeping properties (third revision)
(Part 8/Sec 5) : 2022 Tests for pigments and other solids, Section 5 Lead restriction test (fourth revision)
IS 109 : 2017 Specification for ready mixed paint, finishing, priming, plaster, to Indian Standard colour No. 361 light stone and No. 631 light grey, white and off-white (second revision)
IS 285 : 2021 Laundry soaps - Specification (fourth revision)
IS 1070 : 2023 Reagent grade water (fourth revision)
IS 1303 : 1983 Glossary of terms relating to paints (second revision)
IS 1407 : 1980 Specification for round paint tins (second revision)
IS 2096 : 1982 Asbestos cement flat sheets - Specification (first revision)
IS 3574 (Part 2) : 2000 Organic pigments for paints - Specification: Part 2 Phthalocyanines (first revision)