IS 15582 : 2005 /ISO 4162 : 1990 Hexagon Flange Bolts - Small Series
ICS 21.060.20 | PGD 37 |
|
Reaffirmed 2015 |
National Foreword
This Indian Standard which is identical with ISO 4162 : 1990 �Hexagon flange bolts - Small series�issued by the International Organization for Standardization ( ISO ) was adopted by the Bureau ofIndian Standards on the recommendations of the Bolts, Nuts and Fasteners Accessories SectionalCommittee and approval of the Medical Instruments, General and Production Engineering DivisionCouncil.
The text of ISO Standard has been approved as suitable for publication as an Indian Standard withoutdeviations. Certain terminology and conventions are, however, not identical to those used in IndianStandards. Attention is drawn especially to the following:
a) Wherever the words �International Standard� appear, referring to this standard, they should beread as �Indian Standard�.
b) Comma ( , ) has been used as a decimal marker while in tndian Standards, the current practiceis to use a point ( . ) as the decimal marker.
In this adopted standard, reference appears to certain International Standards for which Indian Standardsalso exist. The corresponding Indian Standards, which are to be substituted in their places are listedbelow along with their degree of equivalence for the editions indicated:
International Standard | Corresponding Indian Standard |
ISO 225 : 1983 | IS 8536 : 1987 Fasteners - Bolts, screws, studs and nuts - Symbols and designation of dimensions ( first revision) |
ISO 261 : 1973 | IS 4218 ( Part 2 ) :2001 ISO general purpose metric screw threads: Part 2 General plan ( second revision) |
ISO 888 : 1976 | IS 4206 : 1987 Dimensions for nominal lengths and thread lengths for bolts, screws and studs ( first revision ) |
ISO 898-1 : 1988 | IS 1367 ( Part 3 ) :2002 Technical supply conditions for threaded steel fasteners: Part 3 Mechanical properties of fasteners made of carbon steel and alloy steel - Bolts, screws and studs ( fourth revision ) |
ISO 965-2 : 1980 | IS 14962 ( Part 2 ) : 2001 ISO general purpose metric screw threads - Tolerances: Part 2 Limits of sizes for general purpose external and internal screw threads - Medium quality |
ISO 3269 : 1988 | IS 1367 ( Part 17 ) :2005 Technical supply conditions for threaded steel fasteners: Part 17 Inspection, sampling and acceptance procedure ( fourth revision) |
ISO 3506 : 1979 | IS 1367 ( Part 14/Sec 1 ) : 2002 Technical supply conditions for threaded steel fasteners: Part 14 Mechanical properties of corrosion resistant stainless-steel fasteners, Section 1 Bolts, screws and studs ( third revision) |
| IS 1367 ( Part 14/Sec 2 ) : 2002 Technical supply conditions for threaded steel fasteners: Part 14 Mechanical properties of corrosion resistant stainless-steel fasteners, Section 2 Nuts ( third revision) |
| IS 1367 ( Part 14/Sec 3 ) : 2002 Technical supply conditions for threaded steel fasteners: Part 14 Mechanical properties of corrosion resistant stainless-steel fasteners, Section 3 Set screws and similar fasteners not under tensile stress ( third revision) |
ISO 4042 : 1989 | IS 1367 ( Part 11 ) :2002 Technical supply conditions for threaded steel fasteners: Part 11 Electroplated coatings ( third revision ) |
ISO 4753 : 1983 | IS 1368 : 2003 Fasteners - Ends of parts with external ISO metric thread ( �fourth revision ) |
ISO 4759-1 : 1978 | IS 1367 ( Part 2 ) : 2002 Technical supply conditions for threaded steel fasteners: Part 2 Tolerance for fasteners - Bolts, screws, studs and nuts - Product grades A, B and C ( third revision) |
ISO 6157-1 : 1988 | IS 1367 ( Part 9/Sec 1 ) : 1993 Technical supply conditions for threaded steel fasteners: Part 9 Surface discontinuities, Section 1 Bolts, screws and studs for general applications ( third revision ) |
ISO 6157-3 : 1988 | IS 1367 ( Part 9/Sec 2 ) : 1993 Technical supply conditions for threaded steel fasteners: Part 9 Surface discontinuities, Section 2 Bolts, screws and studs for special applications ( third revision ) |
ISO 8992 : 1986 | IS 1367 ( Part 1 ) : 2002 Technical supply conditions for threaded steel fasteners: Part 1 General requirements for bolts, screws and studs ( third revision ) |