IS 15607 : 2022 Biodiesel ( B-100 )-Fatty Acid Methyl Esters ( FAME )-Specification

ICS 75.160.20 PCD 03

Revised Standard from Last Update.

1 SCOPE

This standard prescribes the requirements and methods of sampling and tests for biodiesel (B100) fatty acid methyl esters (FAME) for use as a blend stock in diesel fuel confirming to IS 1460, used in compression ignition engines or to use as stand-alone fuel in the engines designed for the purpose. B 100 stand-alone can also be used for heating applications and industrial engines

2 REFERENCES

The following standards contain provisions, which through reference in this text constitute the provisions of the standards. At the time of publication, the editions indicated were valid. All the standards are subject to revision and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standard indicated below:

IS No. Title

1460: 2017 Automotive diesel fuel — Specification (sixth revision)

1447 (Part 1) : 2021 Methods of sampling of petroleum and its products:

Part 1 Manual sampling (second revision)

1448 Methods of test for petroleum and its products

Part 9 : 2019/ ISO 5165 : 2017 Determination of the ignition quality of diesel fuels — Cetane engine method (second revision )

Part 15 : 2004/ ISO 2160 : 1998 Petroleum products — Corrosiveness to copper — Copper strip test (third revision)

Part 16 : 2014/ ISO 3675 : 1998 Crude petroleum and liquid petroleum products — Laboratory determination of density — Hydrometer method (fourth revision)

Part 21 : 2019/ ISO 2719 : 2016 Determination of flash point — Pensky-Martens closed cup method (fourth revision)

Part 25/Sec 1 : 2018/ ISO 3104 : 1994 Transparent and opaque liquids, Section 1 Determination of kinematic viscosity and calculation of dynamic viscosity (second revision)

Part 32 : 2019/ ISO 3838 : 2004 Crude petroleum and liquid or solid petroleum products— Determination of density or relative density — Capillary stoppered pyknometer and graduated bicapillary pyknometer methods (third revision)

Part 110 : 1981 Cold filter plugging point of distillate fuels

Part 159 : 2018/ ISO 20884 : 2011 Determination of sulphur content of automotive fuels — Wavelength-Dispersive X-ray fluorescence spectrometry

Part 160 : 2017/ ISO 20846 : 2011 Determination of sulphur content of automotive fuels — Ultraviolet fluorescence method

Part 161 : 2017/ ISO 13032 : 2012 Determination of low concentration of sulphur in automotive fuels — Energy-dispersive x-ray fluorescence spectrometric method

Part 175 : 2020/ ISO 6296 : 2000 Petroleum products — Determination of water — Potentiometric Karl Fischer titration method

Part 182 : 2020/ISO 12937 : 2000 Petroleum products — Determination of water — Coulometric karl Fischer titration method

Part 187 : 2021/ISO 3987 : 2010 Petroleum products — Determination of sulfated ash in lubricating oils and additives

Part 189 : 2021/ISO 10370 : 2014 Petroleum products — Determination of carbon residue — Micro method