Reaffirmed 2023

NATIONAL FOREWORD

This Indian Standard (Part 9) which is identical with ISO 10360-9 : 2013 ‘Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring systems (CMS) — Part 9: CMMs with multiple probing systems’ issued by the International Organization for Standardization (ISO) was adopted by the Bureau of Indian Standards on recommendation of the Engineering Metrology Sectional Committee and approval of the Production and General Engineering Division Council.

The acceptance and reverification tests described in this part of the standard are applicable to CMMs that use multiple probing systems in contacting and non-contacting mode. The scope of this part is to test the performance of a multiple probing system CMM when two or more probing systems are used on one measurement task. Its general approach is analogous to the multi-stylus test in IS 15635 (Part 5),but focusing on the performance test of different probing system types, for example an imaging probe combined with a contacting probe on single ram CMMs or on multiple ram CMMs.

This Indian Standard is published in several parts. The other parts in this series are:

Part 1 Vocabulary

Part 2 CMMs used for measuring linear dimensions

Part 3 CMMs with the axis of a rotary table as the fourth axis

Part 4 CMMs used in scanning measuring mode

Part 5 CMMs using single and multiple stylus contacting probing systems

Part 6 Estimation of errors in computing Gaussian associated features

Part 7 CMMs equipped with imaging probing systems

Part 8 CMMs with optical distance sensors

The text of ISO Standard has been approved as suitable for publication as an Indian Standard without deviations. Certain terminologies conventions are, however, not identical to those used in Indian Standards. Attention is particularly drawn to the following:

a) Wherever the words ‘International Standard’ appear referring to this standard, they should be read as ‘Indian Standard’.

b) Comma (,) has been used as a decimal marker, while in Indian Standards, the current practice is to use a point (.) as the decimal marker.