1. SCOPE

This standard prescribes the production of retreaded tyres intended to be fitted to passenger cars and their trailers used on the road. It does not however apply to,

a) retreaded tyres for commercial vehicles and their trailers.

b) retreaded tyres with a speed capability below 120 km/h or above 240 km/h (limit of below 120 km/h is not applicable for bias-ply tyres).

c) tyres for cycles and motor cycles.

d) tyres originally produced without speed symbols and load indices.

e) tyres designed exclusively for competition or off road use and marked accordingly.

f) tyres designated as ‘T’ type temporary use spares.

g) tyres originally produced without type approval and without ‘ISI’ mark.

h) tyres designed for the equipment of cars produced prior to 1939.

2. REFERENCES

The following standards contain provisions which through reference in this text, constitute provisions of this standard. At the time of publication, the editions indicated were valid. All standards are subject to revision and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below:

10694 (Part 2) : 1991 Automotive vehicles — Rims — General requirements: Part 2 Passenger car (first revision)

15633 : 2005 Automotive vehicles — Pneumatic tyres for passenger car vehicles — Diagonal and radial ply — Specification