IS 15861 : 2013 : Cotton Seed Delinting Machinery - Pollution Control System with Scrubber, Cyclone, Chimney, Hoods and Ducting

Reaffirmed 2018

1 SCOPE

This standard specifies material, performance and constructional and other requirements of pollution control system with scrubber, cyclone, chimney, hoods and ducting.

2 REFERENCES

The standards listed below contain provisions, which through reference in this text, constitute provisions of this standard. At the time of publication, the editions indicated were valid. All standards are subject to revision and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below:

IS 1364 Hexagon head bolts, screws and nuts of product grades A and B:

(Part 1) : 2002 Hexagon head bolts (size range M 1.6 to M 64) (fourth revision )

(Part 2) : 2002 Hexagon head screws (size range M 1.6 to M 64) (fourth revision )

(Part 3) : 2002 Hexagon nuts, style 1 (size range M 1.6 to M 64) (fourth revision)

(Part 4) : 2003/ISO 4035 : 1999 Hexagon thin nuts (chamfered) (size range M 1.6 to M 64) (fourth revision)

(Part 5) : 2002 Hexagon thin nuts — Product grade B (unchamfered) (size range M 1.6 to M 10) (fourth revision)

(Part 6) : 2002/ISO 4033 : 1999 Hexagon nuts, style 2

IS 2062 : 2011 Hot rolled medium and high tensile structural steel (seventh revision)

IS 5624 : 1993 Foundation bolts - Specification (first revision)