IS 15927 : PART 2 : 2012 : Polyethylene Fittings for use with Polyethylene Pipes for the supply of Gaseous Fuels – Specification Part 2 Spigot Fittings for Butt Fusion for Socket Fusion using Heated Tools and for use with Electro Fusion Fittings

Reaffirmed 2022 1 SCOPE This standard (Part 2) lays down requirements for buried polyethylene spigot fittings using heated tools, where the shape and composition of the fitting is suitable for fusion with polyethlene pipe complying with IS 14885 :2001 'Polyethylene pipes for the supply of gaseous fuels - Specification' and fittings conforming of IS 15927 (Part 1) : 2012 'Polyethylene fittings for use the polyethylene pipes for the supply of gaseous fules-specification: Part 1 Fitting for socket fusion using heated tools' and IS 15927 (Part 3) : 2012 'Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels - Specification : Part 3 Electro fusion fittings' for the supply of gaseous fuels for the nominal out side diameters ranging for 16 mm to 630 mm with SDR 11 and SDR 17.6, material grades PE 80 and PE 100, pressure up to 5.5 bar (see Note) and 7 bar and operating temperatures from -5ºC to 40ºC.