Revised Standard from Last Update.

1. SCOPE

This standard covers gabions, revet mattresses, sack gabions, soil reinforcement facia units and rock fall netting produced from double-twisted galvanized wire mesh, and galvanized wire for lacing wire, used for manufacturing, assembling, and installation of the product. This standard also covers gabions, revet mattresses, sack gabions, soil reinforcement facia units and rock fall netting in which the wire mesh and lacing wire are polymer coated after the galvanizing. Doubletwisted wire mesh for gabions, revet mattresses, sack gabions, soil reinforcement facia units and rock fall netting is produced in different classes based on type of coating.

2. REFERENCES

The standards given below contain provisions which, through reference in this text, constitute provisions of this standard. At the time of publication, the editions indicated were valid. All standards are subject to revision and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below.

280 : 2006 Mild steel wire for general engineering purposes ( fourth revision)

4454 (Part 1) : 2001 Steel wires for mechanical springs - Specification: Part 1 Cold drawn unalloyed steel wires (third revision)

4454 (Part 4) : 2001 Steel wires for mechanical springs - Specification: Part 4 Stainless steel wire (second revision)

4826 : 1979 Specification for hot dipped galvanized coatings on round steel wires (first revision)

12753 : 1989 Electrogalvanized coatings on round steel wire - Specification

13360 (Part 3/Sec 10) : 2016 Plastics - Methods of testing: Part 3 Physical and dimensional properties, Section 10 Determination of density of non-cellular plastics - Immersion method, liquid pyknometer method and titration method

13360 (Part 3/Sec 11) : 2016 Plastics - Methods of testing: Part 3 Physical and dimensional properties, Section 11 Determination of density of non-cellular plastics - Density gradient column method

13360 (Part 3/ Sec 12) : 2016 Plastics - Methods of testing: Part 3 Physical and dimensional properties, Section 12 Determination of density of non-cellular plastics - Gas pyknometer method

13360 (Part 5/Sec 1) : 2018 Plastics - Methods of testing: Part 5 Mechanical properties, Section 1 Determination of tensile properties - General principles ( first revision)

13360 (Part 5/Sec 11) : 2013 Plastics - Methods of testing: Part 5 Mechanical properties, Section 11 Determination of indentation hardness of plastics by means of durometer (shore hardness)

13360 (Part 8/ Sec 14) : 2018 Plastics - Methods of testing: Part 8 Permanence/Chemical properties, Section 14 Determination of the effects of exposure to damp heat, water spray and salt mist ( first revision)

ASTM A975-97 Standard specification for doubletwisted hexagonal mesh gabions and revet mattresses [metallic-coated steel wire or metallic-coated steel wire with polyvinyl chloride (PVC) coating]

EN 10223-3 : 2013 Steel wire and wire products - Part 3: hexagonal steel wire mesh products for civil engineering purposes.

MORTH 2500 : 2013 Specifications for Roads and Bridges (fifth revision).

ISO 4892-3 : 2016 Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps

ISO 37 : 2017 Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties

ISO 974 : 2000 Plastics - Determination of the brittleness temperature by impact