IS 16014 : 2024 Mechanically Woven, Double-Twisted, Hexagonal Wire Mesh Gabions, Revet Mattresses, Rock Fall Netting and Other Products for Civil Engineering Purposes (Galvanized Steel Wire or Galvanized Steel Wire With Polymer Coating) - Specification
| ICS 25.220.99; 77.140.65 | MED 10 |
1 SCOPE
This standard covers gabions, revet mattresses, sack gabions, soil reinforcement facia units and rockfall netting produced from double-twisted galvanized wire mesh, and galvanized wire for lacing wire, used for manufacturing, assembling, and installation of the product. This standard also covers gabions, revet mattresses, sack gabions, soil reinforcement facia units and rock fall netting in which the wire mesh and lacing wire are polymer-coated after the galvanizing. Double- twisted wire mesh for gabions, revet mattresses, sack gabions, soil reinforcement facia units and rockfall netting is produced in different classes based on type of coating.
2 REFERENCES
The standards listed in Annex A contain provisions which, through reference in this text, constitute provisions of this standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent edition of these standards.
| IS No./Other Standards | Title |
| IS 280 : 2006 | Mild steel wire for general engineering purposes (fourth revision) |
| IS 4454 (Part 1) : 2001 | Steel wires for mechanical springs - Specification: Part 1 Cold drawn unalloyed steel wires (third revision) |
| IS 4454 (Part 4) : 2001 | Steel wires for mechanical springs - Specification: Part 4 Stainless Steel wire (second revision) |
| IS 12753 : 1989 | Electro galvanized coatings on round steel wire - Specification |
| IS 13360 | Plastics - Methods of testing |
| (Part 3) | Physical and dimensional properties, |
| (Sec 10) : 2021 | Determination of density of non-cellular plastics - Immersion method, liquid pycnometer method and titration method (first revision) |
| (Sec 11) : 2021 | Determination of density of non-cellular plastics - Density gradient column method (first revision) |
| (Sec 12) : 2016 | Determination of density of non-cellular plastics - Gas pycnometer method |
| (Part 5) | Mechanical properties, |
| (Sec 1) : 2021 | Determination of tensile properties - General principles (second revision) |
| (Sec 11) : 2013 | Determination of indentation hardness) of plastics by means of durometer (shore hardness) |
| (Part 8/Sec 14) : 2018 | Performance/Chemical properties, Section 14 Determination of the effects of exposure to damp heat, water spray and salt mist (first revision) |
| ISO 37 : 2017 | Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties |
| ISO 974 : 2000 | Plastics - Determination of the brittleness temperature by impact |
| IS 4826 : 2023 | Hot dipped galvanized coatings on round steel wires - Specification (second revision) |
| ISO 4892-3 : 2016 | Plastics - Methods of exposure to laboratory light sources - Part 3 : Fluorescent UV lamps |
| ISO 9223 : 2012 | Corrosion of metals and alloys - Corrosivity of atmospheres - Classification, determination and estimation |
| ISO 22479 : 2019 | Corrosion of metals and alloys - Sulfur dioxide test in a humid atmosphere (fixed gas method) |