IS 16582 : Part 1 : 2020/ISO 8116-1 : 1995 Textile Machinery and Accessories — Beams for Winding Part 1 General Vocabulary

New Standard from Last Update.

NATIONAL FOREWORD

This Indian Standard (Part 1) which is identical with ISO 8116-1 : 1995 —Textile machinery and accessories — Beams for winding — Part 1: General vocabulary’ issued by the International Organization for Standardization (ISO) was adopted by the Bureau of Indian Standards on recommendation of the Textiles Machinery and Accessories Sectional Committee and approval of the Textile Division Council.

This Indian Standard is published in several parts. The other parts in this series are:

Part 2 Warper’s beams

Part 3 Weaver’s beams

Part 4 Quality classification of flanges for weaver’s beams, warper’s beams and sectional beams

Part 5 Sectional beams for warp knitting machines

Part 6 Beams for ribbon weaving and ribbon knitting

Part 7 Beams for dyeing slivers, rovings and yarns

Part 8 Definitions of run-out tolerances and methods of measurement

Part 9 Dyeing beams for textile fabrics

The text of ISO Standard has been approved as suitable for publication as an Indian Standard without deviations. Certain terminologies and conventions are, however, not identical to those used in Indian Standards. Attention is particularly drawn to the following:

a) Wherever the words —International Standard’ appear referring to this standard, they should be read as —Indian Standard’.

b) Comma (,) has been used as a decimal marker, while in Indian Standards, the current practice is to use a point (.) as the decimal marker.