IS 1660 : 2024 Wrought and Cast Aluminium Utensils-Specification

ICS 77.150.10; 97.40.60

MED 33

Revised Standard from Last Update.

1. SCOPE

1.1 This standard prescribes general requirements, material and thickness for commonly used wrought and cast aluminum utensils upto 30 litres capacity:

a) Utensils (see Fig. 1 to Fig. 21 and Fig. 25 and Fig. 26);

b) Thick bottom utensils (see Table 2);

c) Compartmental trays (see Fig. 22 and Fig. 23); and

d) Lunch boxes (see Fig. 24).

NOTES

1 The figures of the utensils included in this standard are for representation only.

2 The tests specified in this standard are common for utensils and cookware unless specified as cookware.

3 In case of utensils designated by diameter, it could be a maximum of 600 mm.

1.2 Aluminum utensils shall mean any utensils manufactured from aluminium or its alloys which can be used for cooking (see 1.3), boiling, baking (external heat source, oven), serving or storing of solid/semi-solid/liquid food, water and household provisions.

1.3 Cookware

Utensil intended for use in the preparation and/or cooking of food or beverages on the top of a stove, or any other heating appliance (for illustration, see Fig. 2, 3, 6, 7, 11, 16, 17, 19, 20, 21, 25, and 26).

2. REFERENCES

The standards listed in Annex A contain provisions which, through reference in this text, constitute provisions of this standard. At the time of publication, the editions indicated were valid. All standards are subject to revisions, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent edition of these standards.