IS 16676 : 2024 Solventless Liquid Epoxy System for Application on Interior and Exterior Surfaces of Steel Water Pipeline - Specification
1 SCOPE
1.1 This standard specifies the requirements for application, method of sampling and test and handling of materials of solventless liquid epoxy system for application on interior and exterior surfaces of steel water pipelines, installed underground or underwater, under normal construction conditions, for corrosion protection.
1.2 It is suitable for application by airless spray or plural component system machine. It is not intended for use on pipes that will be bent after coating.
1.3 Solventless system consists of two components; epoxy resin and hardener mainly amide/amines.
2 REFERENCES
The standards listed in Annex A contain provisions, which through reference in this text, constitute provisions of this standard. At the time of publication, the editions indicated were valid. All standards are subject to revision and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent edition of these standards.
| IS No. | Title |
| IS 101 | Methods of sampling and test for paints, varnishes and related products: |
| (Part 1/Sec 1) : 2023 | Test on liquid paints (general and physical), Section 1 Sampling (fourth revision) |
| (Part 3/Sec 2) : 1989 | Tests on paint film formation, Section 2 Film thickness (third revision) |
| (Part 8/Sec 5) : 2022 | Tests for pigments and other solids, Section 5 Lead restriction test (fourth revision) |
| IS 1070 : 2023 | Reagent grade water specification (fourth revision) |
| IS 1303 : 1983 | Glossary of terms relating to paints (second revision) |
| IS 3589 : 2001 | Steel pipes for water and sewage - Specification (third revision) |
| IS 5083 : 2023 | Knifing stopper for railway coaches - Specification (third revision) |
| IS 9954 : 1981 | Pictorial surface preparation standards for painting of steel surfaces |
| IS 10163 (Part 1) : 1982 | Recommended methods of tests for the determination of dielectric properties of insulating materials at frequencies above 300 MHz: Part 1 General |
| IS 10221 : 2008 | Coating and wrapping of underground mild steel pipelines - Code of practice (first revision) |
| IS 10500 : 2012 | Drinking water - Specification (second revision) |
| IS 11755 : 1986 | Methods of test for the determination of electrical resistance and resistivity of insulating materials at elevated temperatures |
| IS 15337 : 2003 | Coal tar based anticorrosion tape for protection of underground mild steel pipelines - Specification |