1. SCOPE

The purpose of this standard is to define the basic architecture and performance requirements of the automotive tracking systems. The ATD system consistsof the receiver, receiver antenna, transmitter, transmitter antenna, controller, etc. The standard covers theperformance requirements of the automotive tracking device (ATD) with an integrated emergency button system and other configurations/applications of ATD in different annexes as mentioned below. Annex A, B, C and D are the fixed system:

a) Annex A: ATD with an integrated emergency system.

b) Annex B: ATD with an integrated emergency system and fare meter.

c) Annex C: CCTV system with an integrated emergency system.

d) Annex D: CCTV system with in-built tracking system and integrated emergency system.

2. REFERENCES

The following standards contain provisions which through reference in this text, constitute provisions of this standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below:

2465 : 1984 Specifications for cable for motor vehicles

4905 : 2015 Random sampling and randomization processes

9000 (Part 2/Sec 4) : 2004 Basic environmental testing procedures for electronic and electrical items: Part 2 Cold test Section 4 Cold test for heat dissipating items with gradual change of temperature

9000 (Part 3/Sec 5) : 1977 Basic environmental testing procedures for electronic and electrical items: Part 3 Dry heat test

9000 (Part 5/Sec 2) : 1981 Basic environmental testing procedures for electronic and electrical items: Part 5 damp heat (cyclic) test

10250 : 1982 Specification for severities for environmental test for automotive electrical equipment