IS 16860 : Part 3 : 2018/ISO 7296-3 : 2006 Cranes - Graphical Symbols Part 3 Tower Cranes

ICS 53.020.20; 01.080.20

MED 14

Reaffirmed 2023

NATIONAL FOREWORD

This Indian Standard (Part 3) which is identical with ISO 7296-3 : 2006 ‘Cranes — Graphical symbols — Part 3: Tower cranes’ issued by the International Organization for Standardization (ISO) was adopted by the Bureau of Indian Standards on recommendation of the Cranes, Lifting Chains and Its Related Equipment Sectional Committee and approval of the Mechanical Engineering Division Council.

Other parts in this series are:

Part 1 General

Part 2 Mobile cranes

The text of ISO Standard has been approved as suitable for publication as an Indian Standard without deviations. Certain conventions are however not identical to those used in Indian Standards. Attention is particularly drawn to the following:

a) Wherever the words ‘International Standard’ appear referring to this standard, they should be read as ‘Indian Standard’.

b) Comma (,) has been used as a decimal marker while in Indian Standards, the current practice is to use a point (.) as the decimal marker.