IS 168 : 2024 Ready Mixed Paint, Air Drying, for General Purpose - Specification

ICS 87.040

CHD 20

1 SCOPE

This standard prescribes requirements and methods of sampling and test for ready mixed paint, airdrying, for general purposes, colour as required. The material is normally used for the protection of parts of apparatus, appliances, equipment, etc, connected with ammunition where air-drying is required.

2 REFERENCES

The standards listed in Annex A contain provisions, which through reference in this text, constitute provisions of this standard. At the time of publication, the editions indicated were valid. All standards are subject to revision and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent edition of these standards.

IS No. Title
IS 5 : 2007 Colours for ready mixed paints and enamels (sixth revision)
IS 101 Methods of sampling and test for paints, varnish and related products:
(Part l) Test on liquid paints (general and physical),
(Sec 1) : 2023 Sampling (fourth revision)
(Sec 2) : 2023 Preliminary examination and preparation of samples for testing (fourth revision)
(Sec 3) : 1986 Preparation of panels (third revision)
(Sec 5) : 2024 Consistency (fourth revision)
(Sec 6) : 1987 Flash point (third revision)
(Sec 7) : 2020 Mass per 10 litres - Determination of density - Pycnometer method (fourth revision)
(Part 2/Sec 1) : 2018 Test on liquid paints (chemical examination), Section 1 Water content (fourth revision)
(Part 3) Tests on paint film formation,
(Sec 1) : 1986 Drying time (third revision)
(Sec 4) : 1987 Finish (third revision)
(Sec 5) : 2022 Determination of fineness of grind (fourth revision)
(Part 4) Optical tests on paint films,
(Sec 2) : 2021 Colour-visual comparison of colour of paints (fourth revision)
(Sec 3) : 1988 Light fastness test (third revision)
(Sec 4) : 2020 Gloss - Determination of gloss value at 20°, 60° and 85° (fourth revision)
(Part 5) Mechanical tests on paint film,
(Sec 1) : 1988 Hardness tests (third revision)
(Sec 2) : 1988 Flexibility and adhesion (third revision)
(Part 6) Durability tests on paint films,
(Sec 1) : 1988 Resistance to humidity under conditions of condensation (third revision)
(Sec 2) : 1989 Keeping properties (third revision)
(Part 7/Sec 2) : 1990 Environmental test on paint films, Section 2 Resistance to liquids (third revision)
(Part 8) Tests for pigments and other solids,
(Sec 5) : 2022 Lead restriction test (fourth revision)
(Sec 6) : 1993 Volume solids
IS 1070 : 2023 Reagent grade water - Specification (fourth revision)
IS 1303 : 1983 Glossary of terms relating to paints (second revision)
IS 1407 : 1980 Round paint tins (second revision)
IS 1745 : 2018 Petroleum hydrocarbon solvents - Specification (third revision)
IS 2552 : 1989 Steel drums (galvanized and ungalvanized) (third revision)
IS 5661 : 2023 Packing and marking of packages of paints, enamels, varnishes and allied productscode of practice (first revision)