New Standard from Last Update.

1. SCOPE

This standard specifies the requirements and methods of sampling and test for silicone soya alkyd exterior paint for application on exterior structures located in marine environment. This paint is one component system suitable for application by brush/spray.

2. REFERENCES

The standards listed below contain provisions, which through reference in this text, constitute provisions of and necessary adjuncts to this standard. At the time of publication, the editions indicated were valid. All standards are subject to revision and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below:

101 (Part 1/Sec 1) : 1986 Methods of sampling and test for paints, varnishes and related products: Part 1 Test on liquid paints (general and physical), Section 1 Sampling (third revision)

101 (Part 1/Sec 2) : 1986 Methods of sampling and test for paints, varnishes and related products: Part 1 Test on liquid paints (general and physical), Section 2 Preliminary examination and preparation of samples for testing

101 (Part 1/Sec 4) : 1987 Methods of sampling and test for paints, varnishes and related products: Part 1 Test on liquid paints (general and physical), Section 4 Brushing test (third revision)

101 (Part 1/Sec 6) : 1987 Methods of sampling and test for paints, varnishes and related products: Part 1 Test on liquid paints (general and physical), Section 6 Flash point (third revision)

101 (Part 1/Sec 7) : 1987 Methods of sampling and test for paints, varnishes and related products: Part 1 Test on liquid paints (general and physical), Section 7 Mass per 10 litre (third revision)

101 (Part 3/Sec 1) : 1986 Methods of sampling and test for paints, varnishes and related products: Part 3 Test on paint film formation, Section 1 Drying time (third revision)

101 (Part 3/Sec 4) : 1987 Methods of sampling and test for paints, varnishes and related products: Part 3 Test on paint film formation, Section 4 Finish (third revision)

101 (Part 4/Sec 4) : 1989 Methods of sampling and test for paints, varnishes and related products: Part 4 Optical tests on paint films, Section 4 Gloss (third revision)

101 (Part 4/Sec 2) : 1989 Methods of sampling and test for paints, varnishes and related products: Part 4 Optical tests on paint films, Section 2 Colour (third revision)

101 (Part 5/Sec 2) : 1988 Methods of sampling and test for paints, varnishes and related products: Part 5 Mechanical tests on paint films, Section 2 Flexibility and adhesion tests (third revision)

101 (Part 6/Sec 1) : 1988 Methods of sampling and test for paints, varnishes and related products: Part 6 Durability test on paint films, Section 1 Durability under conditions of condensation

101 (Part 6/Sec 2) : 1989 Methods of sampling and test for paints, varnishes and related products: Part 6 Durability test on paint films, Section 2 Keeping Properties (third revision)

101 (Part 6/Sec 5) : 1997 Methods of sampling and test for paints, varnishes and related products: Part 6 Durability test on paint films, Section 5 Accelerated weathering test

101 (Part 8/Sec 2) : 1990 Methods of sampling and test for paints, varnishes and related products: Part 8 Test for pigments and other solids, Section 2 Pigments and non-volatile matter (third revision)

101 (Part 8/Sec 6) : 1993 Methods of sampling and test for paints, varnishes and related products: Part 8 Test for pigments and other solids, Section 6 Volume solid.

513 : 1994 Cold rolled low carbon steel sheets and strips — Specification (third revision)

715 : 2002 Coated abrasives

1070 : 1992 Reagent grade water (third revision)

1303 : 1983 Glossary of terms relating to paint (second revision)

2552 : 1971 Steel drums (galvanized and ungalvanized) (second revision)

9788 : 1981 Titanium dioxide, rutile for paints — Specification