New Standard from Last Update.

1. SCOPE

1.1 This standard specifies the requirements and method of sampling and test for two component epoxy titanium dioxide ( TiO₂ ) pigmented intermediate coat.

1.2 This material is expected to have adhesion on inorganic zinc silicate coating and epoxy based primers with high toughness and abrasion resistance. This material is used as an intermediate coat for painting of steel equipment and steel structures of thermal power plants, where protections from salt water, chemicals, mineral oils, solvents and resistance to moisture, protection under marine/refinery conditions are required.

2. REFERENCES

The standards listed below contain provisions, which through reference in this text, constitute provisions of and necessary adjuncts to this standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below:

101 (Part 1/Sec 1) : 1986 Methods of sampling and test for paints, varnishes and related products: Part 1 Test on liquid paints (general and physical), ection 1 Sampling (third revision)

101 (Part 1/Sec 3) : 1986 Methods of sampling and test for paints, varnishes and related products: Part 1 Test on liquid paints (general and physical), Section 3 Preparation of panels (third revision) p>101 (Part 1/Sec 5) : 1989 Methods of sampling and test for paints, varnishes and related products: Part 1 Test on liquid aints (general and physical), Section 5 Consistency (third revision)

101 (Part 1/Sec 6) : 1987 Methods of sampling and test for paints, varnishes and related products: Part 1 Test on liquid paints (general and physical),Section 6 Flash point (third revision)

101 (Part 1/Sec 7) : 1987 Methods of sampling and test for paints, varnishes and related products: Part 1 Test on liquid paints (general and physical), Section 7 Mass per 10 litre (third revision)

101 (Part 3/Sec 1) : 1986 Methods of sampling and test for paints, varnishes and related products: Part 3 Test on paint film formation, Section 1 Dryingtime (third revision)

101 (Part 3/Sec 2) : 1989 Methods of sampling and test for paints, varnishes and related products: Part 3 Test on paint film formation, Section 2 Film thickness (third revision)

101 (Part 3/Sec 4) : 1987 Methods of sampling and test for paints, varnishes and related products: Part 3 Test on paint film formation, Section 4 Finish (third revision)

101 (Part 4/Sec 2) : 1989 Methods of sampling and test for paints, varnishes and related products, Part 4 Optical tests on paint films, Section 2 Colour (third revision)

101 (Part 5/Sec 1) : 1988 Methods of sampling and test for paints, varnishes and related products,: Part 5 Mechanical tests on paint films, Section 1 Hardness test (third revision)

101 (Part 5/Sec 2) : 1988 Methods of sampling and test for paints, varnishes and related products: Part 5 Mechanical tests on paint films, Section 2 Flexibility and adhesion tests (third revision)

101 (Part 6/Sec 1) : 1988 Methods of sampling and test for paints, varnishes and related products: Part 6 Durability test on paint films, Section 1 Durability under conditions of Condensation

101 (Part 8/Sec 6) : 1993 Methods of sampling and test for paints, varnishes and related products: Part 8 Test for pigments and other solids, Section 6 Volume solid

1070 : 1992 Reagent grade water (third revision)

1303 : 1983 Glossary of terms relating to paint (second revision)

13238 : 1991 Epoxy based zinc phosphate primer (two pack) — Specification