IS 16983 : 2024 Solid Bleached Sulphate Board - Specification

ICS 85.060; 85.080

CHD 16

1 SCOPE

This standard prescribes the requirements, methods of sampling and test for solid bleached sulphate (SBS) board.

2 REFERENCES

The standards listed in Annex A contain provisions, which through reference in this text, constitute provisions of this standard. At the time of publication, the editions indicated were valid. All standards are subject to revision and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent edition of these standards.

IS No/Other Standards. Title
IS 1060 Methods of sampling and test for paper and allied products:
(Part 1) : 2022 Test methods for general purpose (second revision)
(Part 2) : 1960 Methods of sampling and test for paper and allied products: Part 2
(Part 3) : 1969 Methods of sampling and test for paper and allied products: Part 3
(Part 4) Methods of test for paper, board and pulps,
(Sec 7) : 2024/ISO 6588-2 : 2021 Determination of pH of aqueous extracts - Hot extraction method (first revision)
(Sec 8) : 2024/ISO 9197 : 2016 Determination of watersoluble chlorides (first revision)
(Sec 9) : 2024/ISO 9198 : 2020 Determination of watersoluble sulfates (first revision)
(Sec 13) : 2020/ISO 2470-1 : 2016 Measurement of diffuse blue reflectance factor - Indoor daylight conditions (ISO brightness) (first revision)
(Part 5) Methods of test for paper and board,
(Sec 2) : 2021/ISO 287 : 2017 Determination of moisture content of a lot - Ovendrying method (first revision)
(Sec 3) : 2014/ISO 534 : 2011 Determination of thickness, density and specific volume
(Sec 4) : 2014/ISO 535 : 1991 Determination of water absorptiveness - Cobb method
(Sec 5) : 2021/ISO 536 : 2019 Determination of grammage (first revision)
(Sec 8) : 2024/ISO 2493-2 : 2020 Determination of bending resistance - Taber-type tester (first revision)
(Sec 9) : 2014/ISO 3783 : 2006 Determination of resistance to picking - Accelerated speed method using the IGT-type tester (electric model)
(Sec 12) : 2021/ISO 8254-1 : 2009 Measurement of specular gloss - 75 degree gloss with a converging beam, TAPPI method (first revision)
(Sec 17) : 2024/ISO 8791-4 : 2021 Determination of roughness/smoothness (air leak methods) - Print- Surf method (first revision)
(Sec 20) : 2018/ISO 8791-2 : 2013 Determination of roughness/smoothness (air leak methods) - Bendtsen method
(Part 7/Sec 1) : 2014/ISO 2759 : 2001 Methods of test for board, Section 1 Determination of bursting strength of board
IS 4661 (Part 5) : 2022/ISO 4046-5 : 2016 Paper, board, pulps and related terms - Vocabulary: Part 5 Properties of pulp, paper and board (third revision)
T-569 pm-00 TAPPT - Internal bond strength (Scott type)