New Standard from Last Update.

1. Scope

This standard is applicable to Light Electric Vehicle AC Charge Point (LEV AC Charge Point), which is a basic conductive AC charging option for charging light electric road vehicles with rated supply voltage 240 V a.c. and current up to 16A a.c.

The standard covers requirements of LEV AC Charge Point with respect to functionality, environmental aspects, energy measurement, mechanical and electrical safety considerations.

2. References

The standards listed below contain provisions, which, through reference in this text, constitute provisions of this standard. At the time of publication, the editions indicated were valid. All standards are subject torevision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards listed below:

IS No./ Other Publication - Title

IS 302 (Part 1) : 2008 Safety of household and similar appliances: Part 1General requirements

IS 732 : 2019 Code of practice for electrical wiring installations

IS 1293 : 2019 Plugs and socket - Outlets of rated Voltage up to and including 250 Volts and rated current up to and including16 amperes - Specification

IS 9000 (Part 2/ Sec 1 to 4) : 1977 Basic environmental testing procedures for electronic andelectrical items: Part 2 Cold test

IS 9000 (Part 3/ Sec 1 to 5) : 1977 Basic environmental testing procedures for electronic and electrical items: Part 3 Dry heat test

IS 9000 (Part 4) : 2008 Basic environmental testing procedures for electronic andelectrical items: Part 4 Damp heat (steady state)

IS 9000 (Part 5/ Sec 1 and 2) : 1981 Basic environmental testing procedures for electronic and electrical items: Part 5 Damp heat (cyclic)test

IS 12346 : 1999 Testing equipment for AC electrical energy meters

IS 12360 : 1988 Voltage bands for electrical installations including preferred voltages and frequency

IS 12640 (Part 1) : 2016 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs): Part 1 General rules

IS 12640 (Part 2) : 2016 Residual current operated circuit-breakers with integral overcurrent protection forhousehold and similar uses (RCBOs): Part 2 Generalrules

IS 13703 (All Parts) Low-voltage fuses for voltages not exceeding 1000 V AC or 1500 V DC

IS 13799 : 2020 AC static watthour meters, class 1 and class 2 specification

IS 15382 (Part 1) : 2014 Insulation coordination for equipment within low- voltage Systems: Part 1 Principles, requirements, and tests

IS 16444 : 2015 A.C. static direct connected watthour smart meter class 1 and 2 –specification

IS 16444 (Part 2) : 2017 A.C. static transformer operated watthour and var- hour smart meters, class 0.2 S, 0.5 S and 1.0 S - Part 2: specification transformer operated smart meters

IS 17017 (Part 1) : 2018 Electric Vehicle Conductive Charging System Part 1 General Requirements

IS 17017 (Part 21/Sec 2) : 2019 Electric Vehicle Conductive Charging System: Part 21 Electromagnetic Compatibility (EMC) Requirements: Section 2 Off-board chargers

IS 17050 : 2018 Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)

IS 17064 (Part 1) : 2018 Electromechanical elementary relays: Part 1 General and safety requirements

IS/IEC 60309 (Part 1) : 2002 Plugs, socket-outlets and couplers for industrial purposes: Part 1 General requirements

IS/IEC 60309 (Part 2) : 2002 Plugs, socket-outlets and couplers for industrial purposes: Part 2 Dimensional interchangeability requirements for pin and contact – Tube accessories

IS/IEC 60529 : 2001 Degrees of protection provided by enclosures (IP Code)

IS/IEC 60898-1 : 2002 Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations: Part1Circuit- breakers for a.c. operation

IS/IEC 60898-2 : 2003 Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations: Part 2 Circuit- breakers for a.c. and d.c. operation

IS/IEC 60947 (Part 2) : 2016 Low-voltage switchgear and control gear: Part 2 Circuit-breakers

IS/IEC 60947 (Part 3) : 2012 Low-voltage switchgear and control gear: Part 3 Switches, disconnectors, switch-disconnectors and fuse-combination units

IS/IEC 60947 (Part 5/Sec 5) : 1997+AMD1 : 2005+AMD2 : 2016 Low-voltage switchgear and control gear - Part 5-5: Control circuit devices and switching elements —Electrical emergency stop device with mechanical latching function

IS/IEC 60990 : 2016 Methods of measurement of touch current and protective conductor current

IS/IEC 61508 (All Parts) Functional safety of electrical/electronic/ programmable electronic safety-related systems

IS/IEC 61558 (Part 1) : 1997 Safety of power transformers, power supply units and similar: Part 1 general requirements and tests

IS/IEC 61558 (Part 2/Sec 4) : 2009 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1100V – Part 2-4: Particular requirements and test for isolating transformers and power supply units incorporating isolating transformers

IEC 60947 (Part 6/Sec 2) : 2002+AMD1 : 2007 Low-voltage switchgear and control gear – Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS)

IEC 61180 : 2016 High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment

IEC 61316 : 1999 Industrial cable reels

IEC 61439 (Part 7) : 2018 Low-voltage switchgear and control gear assemblies - Part 7: Assemblies for specific applications such as marinas, camping sites, market squares, electric vehicles charging stations

IEC 62335 : 2008 Circuit breakers – Switched protective earth portable residual current devices for class I and battery powered vehicle applications

ISO 17409 : 2020 Electrically propelled road vehicles - Conductive power transfer - Safety requirements